영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
공기 필터 및 화학 여과
위험한 지역을 위한 정전기 방지 HEPA 필터
A conductive metal-frame HEPA filter with antistatic media support and an accessible bonding point for ventilation systems handling potentially combustible dust or vapour environments.
- Conductive Metal Frame
- External Bonding Point
- Antistatic Media Support
- Robust Box Construction
상품 소개
The antistatic HEPA filter for hazardous areas uses a conductive galvanized-steel or stainless-steel box frame, electrically continuous faceguards and a dedicated bonding lug. Glass-microfibre or membrane media is supported by conductive separators or antistatic grids so charge can dissipate through the frame when the filter is correctly earthed in its housing. Continuous pack potting and a conductive or compatible closed-cell gasket control bypass. The construction is intended for engineered dust-control and process-exhaust systems where electrostatic-charge management forms part of the overall hazard-control design.
주요 기능
A visible external earth lug allows the installed filter to be connected to the housing bonding network.
Conductive separators or antistatic support grids reduce isolated charge accumulation around the media pack.
A rigid deep box frame protects the HEPA element from vibration and handling in industrial exhaust equipment.
고객 제품 관심사
In a potentially explosive atmosphere, a filter must control fine particles without becoming an electrically isolated component in the ventilation path.
A plastic or isolated frame can accumulate electrostatic charge in a dry dust stream.Conductive metal construction and an external bonding lug provide a deliberate discharge path when correctly installed.
The media faceguard is conductive but not electrically connected to the main frame.Bonded faceguards and conductive supports maintain continuity across the filter assembly.
Industrial vibration loosens a lightweight terminal-panel frame.A reinforced box frame and securely potted pack suit ducted process-exhaust housings.
Operators cannot visually confirm where the filter should be earthed.A clearly accessible bonding stud provides an identifiable connection point on the frame.
일반적인 응용 프로그램
Combustible-dust extraction afterfiltrationSolvent-process exhaust systemsPowder-handling containment equipmentBattery-material production ventilationHazardous-area clean manufacturing
기술 매개변수
Representative conductive construction ranges for an antistatic hazardous-area HEPA filter are listed below.
| 핵심 재료 | Glass-microfibre or membrane HEPA media with conductive separators or antistatic support grid |
|---|---|
| 패널 두께 | 150–292 mm overall filter depth |
| 유효 폭 | 305 - 610 mm 공칭 면 너비 |
| 최대 길이 | Up to 762 mm nominal face height |
| 강철 면면 두께 | 0.8–1.2 mm galvanized-steel or stainless-steel conductive frame |
| 코어 밀도 | Approximately 42–68 kg/m³ equivalent antistatic packed-media density |
| 열전도도 (Thermal Conductivity) | Approximately 0.035–0.045 W/(m·K) for the dry filter media pack |
| 표면 마무리 | Bare galvanized steel or clean conductive stainless steel with bonded faceguards |
| 접합 유형 | Conductive gasket or compatible closed-cell gasket with external equipotential-bonding lug |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
H13 or H14 filter mediaGalvanized-steel or stainless-steel frameConductive gasket or standard closed-cell gasketUpstream and downstream bonded faceguards
Planning a Antistatic HEPA Filter for Hazardous Areas specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
