Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Z Antimicrobiano Sticky Mat
Antimicrobial cleanroom sticky mat with treated peel-away LDPE layers, water-based acrylic tack and numbered tabs for hygiene-sensitive entrances.
- Antimicrobial-treated peel-away entrance mat
- Captures footwear and wheel-borne particles
- Numbered LDPE layers support controlled replacement
Introdução do produto
The Antimicrobial Sticky Mat combines routine particle pickup with an antimicrobial-treated film construction for hygiene-sensitive transition zones. Each smooth LDPE sheet carries a pressure-sensitive water-based acrylic adhesive that collects loose debris from boot covers, footwear and equipment wheels. The additive is incorporated into or applied to the film according to the selected formulation; its purpose is to limit microbial growth on the mat surface between layer changes, not to replace validated cleaning or disinfection procedures.
Características-chave
Peel-away sheet stack exposes a fresh adhesive surface without relocating the mat
Numbered tabs help operators track consumption and replace one layer at a time
Low-profile smooth film tolerates normal footwear and light-cart passage
Multiple tack grades, sizes and backing styles suit different transition points
Preocupações do produto do cliente
High-hygiene entrances need both mechanical particle removal and disciplined layer management. Antimicrobial treatment must remain a supplemental surface feature while facilities retain their established cleaning, monitoring and disposal procedures.
Buyers may confuse antimicrobial treatment with a sterilizing claim.Define antimicrobial performance for the selected formulation and preserve the site's validated hygiene program.
The film treatment must not undermine adhesive pickup or release behavior.Match film gauge and tack grade to footwear, wheel load and required particle pickup.
A contaminated top sheet can remain in service too long when layer use is not tracked.Use numbered tabs and a documented inspection interval to control sheet replacement.
Mat edges may lift under repeated trolley traffic if the floor bond is inadequate.Install on a clean dry substrate with full backing, adhesive strips or a compatible frame.
Aplicações típicas
Suitable for pharmaceutical gowning entrances, biotechnology laboratories, medical-device assembly, hospital support areas, food and cosmetic packaging transitions and other controlled zones where particle pickup and surface-hygiene support are both desired.
Parâmetros técnicos
These ranges reflect common antimicrobial peel-off cleanroom mat configurations. Final antimicrobial agent, test method, color, dimensions and tack level should be confirmed for the intended operating environment.
| Material principal | Antimicrobial-treated low-density polyethylene film with water-based acrylic adhesive |
|---|---|
| Painel de espessura | 1.2-3.0 mm for typical 30- or 60-layer stacks |
| Largura efetiva | 450-900 mm |
| Comprimento máximo | 1500 mm |
| Aço enfrentando espessura | 0 mm; no steel facing used |
| Densidade Core | 910-940 kg/m³ LDPE film |
| Condutividade térmica | 0.33-0.50 W/(m·K), formulation dependent |
| Superfície acabado | Smooth antimicrobial-treated blue or green peel-away adhesive film with numbered tabs |
| Tipo conjunto | Laminated removable film layers with floor-side pressure-sensitive backing |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Blue, green, white or grey treated film30-layer or 60-layer stacks35, 45 or 50 micrometre sheet gaugesLow, medium or high tackFull backing or adhesive-strip installationProject-specific antimicrobial formulation and verification method
Planning a Antimicrobial Sticky Mat specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
