Green antimicrobial cleanroom sticky mat in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Mat Antimikroba Sticky Mat

Antimicrobial cleanroom sticky mat with treated peel-away LDPE layers, water-based acrylic tack and numbered tabs for hygiene-sensitive entrances.

Antimicrobial-treated peel-away entrance mat
Captures footwear and wheel-borne particles
Numbered LDPE layers support controlled replacement

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Antimicrobial Sticky Mat combines routine particle pickup with an antimicrobial-treated film construction for hygiene-sensitive transition zones. Each smooth LDPE sheet carries a pressure-sensitive water-based acrylic adhesive that collects loose debris from boot covers, footwear and equipment wheels. The additive is incorporated into or applied to the film according to the selected formulation; its purpose is to limit microbial growth on the mat surface between layer changes, not to replace validated cleaning or disinfection procedures.

Ciri-ciri Utama

Treated film supports surface hygiene between scheduled layer changes

Peel-away sheet stack exposes a fresh adhesive surface without relocating the mat

Numbered tabs help operators track consumption and replace one layer at a time

Low-profile smooth film tolerates normal footwear and light-cart passage

Multiple tack grades, sizes and backing styles suit different transition points

Kebimbangan Produk Pelanggan

High-hygiene entrances need both mechanical particle removal and disciplined layer management. Antimicrobial treatment must remain a supplemental surface feature while facilities retain their established cleaning, monitoring and disposal procedures.

Buyers may confuse antimicrobial treatment with a sterilizing claim.Define antimicrobial performance for the selected formulation and preserve the site's validated hygiene program.

The film treatment must not undermine adhesive pickup or release behavior.Match film gauge and tack grade to footwear, wheel load and required particle pickup.

A contaminated top sheet can remain in service too long when layer use is not tracked.Use numbered tabs and a documented inspection interval to control sheet replacement.

Mat edges may lift under repeated trolley traffic if the floor bond is inadequate.Install on a clean dry substrate with full backing, adhesive strips or a compatible frame.

Permohonan yang biasa

Suitable for pharmaceutical gowning entrances, biotechnology laboratories, medical-device assembly, hospital support areas, food and cosmetic packaging transitions and other controlled zones where particle pickup and surface-hygiene support are both desired.

Parameter teknikal

These ranges reflect common antimicrobial peel-off cleanroom mat configurations. Final antimicrobial agent, test method, color, dimensions and tack level should be confirmed for the intended operating environment.

Bahan Teras	Antimicrobial-treated low-density polyethylene film with water-based acrylic adhesive
Ketebalan Panel	1.2-3.0 mm for typical 30- or 60-layer stacks
Lebar berkesan	450-900 mm
Panjang maksimum	1500 mm
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	910-940 kg/m³ LDPE film
Kekonduksian Terma	0.33-0.50 W/(m·K), formulation dependent
Kemasan permukaan	Smooth antimicrobial-treated blue or green peel-away adhesive film with numbered tabs
Jenis Bersatu	Laminated removable film layers with floor-side pressure-sensitive backing
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Blue, green, white or grey treated film30-layer or 60-layer stacks35, 45 or 50 micrometre sheet gaugesLow, medium or high tackFull backing or adhesive-strip installationProject-specific antimicrobial formulation and verification method

Planning a Antimicrobial Sticky Mat specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami