영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 의류, PPE 및 소모품
Antibiotic Sticky 매트
Antimicrobial cleanroom sticky mat with treated peel-away LDPE layers, water-based acrylic tack and numbered tabs for hygiene-sensitive entrances.
- Antimicrobial-treated peel-away entrance mat
- Captures footwear and wheel-borne particles
- Numbered LDPE layers support controlled replacement
상품 소개
The Antimicrobial Sticky Mat combines routine particle pickup with an antimicrobial-treated film construction for hygiene-sensitive transition zones. Each smooth LDPE sheet carries a pressure-sensitive water-based acrylic adhesive that collects loose debris from boot covers, footwear and equipment wheels. The additive is incorporated into or applied to the film according to the selected formulation; its purpose is to limit microbial growth on the mat surface between layer changes, not to replace validated cleaning or disinfection procedures.
주요 기능
Peel-away sheet stack exposes a fresh adhesive surface without relocating the mat
Numbered tabs help operators track consumption and replace one layer at a time
Low-profile smooth film tolerates normal footwear and light-cart passage
Multiple tack grades, sizes and backing styles suit different transition points
고객 제품 관심사
High-hygiene entrances need both mechanical particle removal and disciplined layer management. Antimicrobial treatment must remain a supplemental surface feature while facilities retain their established cleaning, monitoring and disposal procedures.
Buyers may confuse antimicrobial treatment with a sterilizing claim.Define antimicrobial performance for the selected formulation and preserve the site's validated hygiene program.
The film treatment must not undermine adhesive pickup or release behavior.Match film gauge and tack grade to footwear, wheel load and required particle pickup.
A contaminated top sheet can remain in service too long when layer use is not tracked.Use numbered tabs and a documented inspection interval to control sheet replacement.
Mat edges may lift under repeated trolley traffic if the floor bond is inadequate.Install on a clean dry substrate with full backing, adhesive strips or a compatible frame.
일반적인 응용 프로그램
Suitable for pharmaceutical gowning entrances, biotechnology laboratories, medical-device assembly, hospital support areas, food and cosmetic packaging transitions and other controlled zones where particle pickup and surface-hygiene support are both desired.
기술 매개변수
These ranges reflect common antimicrobial peel-off cleanroom mat configurations. Final antimicrobial agent, test method, color, dimensions and tack level should be confirmed for the intended operating environment.
| 핵심 재료 | Antimicrobial-treated low-density polyethylene film with water-based acrylic adhesive |
|---|---|
| 패널 두께 | 1.2-3.0 mm for typical 30- or 60-layer stacks |
| 유효 폭 | 450-900 mm |
| 최대 길이 | 1500 mm |
| 강철 면면 두께 | 0 mm, 강철 면재 사용 없음 |
| 코어 밀도 | 910-940 kg/m³ LDPE film |
| 열전도도 (Thermal Conductivity) | 0.33-0.50 W/(m·K), formulation dependent |
| 표면 마무리 | Smooth antimicrobial-treated blue or green peel-away adhesive film with numbered tabs |
| 접합 유형 | Laminated removable film layers with floor-side pressure-sensitive backing |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Blue, green, white or grey treated film30-layer or 60-layer stacks35, 45 or 50 micrometre sheet gaugesLow, medium or high tackFull backing or adhesive-strip installationProject-specific antimicrobial formulation and verification method
Planning a Antimicrobial Sticky Mat specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
