Z Unidade de filtro de ventilador de aço revestido com Aluzinc
- Aluminium-Zinc Coated Housing
- Visible Protective Spangle
- Folded Lock-Seam Construction
- Cost-Effective Corrosion Resistance
Introdução do produto
The Aluzinc-coated steel fan filter unit uses aluminium-zinc metallic-coated sheet for the plenum, access covers and formed mounting edges. The characteristic crystalline spangle remains visible, making the housing easy to distinguish from brushed stainless steel. Folded lock seams create rigid edges without extensive welding, while zinc-compatible clips and passivated fasteners limit dissimilar-metal contact. The material is intended for clean ceiling voids where a natural metallic finish and improved atmospheric corrosion resistance are required without the mass and cost of an all-stainless enclosure.
Características-chave
A formed lock-seam casing gains stiffness from folded edges while keeping the module comparatively light.
The natural metallic surface eliminates a paint layer that could be scratched during overhead handling.
Compatible clips, screws and gasket retainers reduce avoidable galvanic contact at service points.
Preocupações do produto do cliente
A metallic FFU housing must resist routine plenum humidity and installation scratches without introducing unnecessary stainless-steel cost.
Aplicações típicas
Parâmetros técnicos
Typical construction ranges for an Aluzinc-coated steel fan filter unit are listed below.
| Material principal | Aluminium-zinc coated steel plenum, centrifugal fan assembly and micro-glass HEPA or ULPA final-filter pack |
|---|---|
| Painel de espessura | 300-400 mm overall module depth |
| Largura efetiva | 575-1170 mm nominal ceiling-grid width |
| Comprimento máximo | Up to 1170 mm standard module length |
| Aço enfrentando espessura | 0.8-1.2 mm Aluzinc or Galvalume coated steel sheet |
| Densidade Core | Approximately 80-110 kg/m³ nominal compacted density of the micro-glass filter pack |
| Condutividade térmica | Approximately 0.035-0.045 W/(m·K) for the dry micro-glass pack inside the Aluzinc-coated FFU housing |
| Superfície acabado | Natural passivated Aluzinc spangle with optional powder-coated cleanroom-side diffuser |
| Tipo conjunto | Folded lock-seam plenum with gasketed ceiling flange and compression-sealed removable filter frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Planning a Aluzinc-Coated Steel Fan Filter Unit specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã