Three-quarter view of an Aluzinc-coated steel fan filter unit with crystalline metallic housing

FFU およびターミナル空気浄化装置

Aluzinc コーティングされた鋼鉄ファンフィルター単位

A durable FFU using spangled aluminium-zinc coated steel to combine the stiffness of formed sheet with better atmospheric corrosion resistance than untreated galvanized housing.

Aluminium-Zinc Coated Housing
Visible Protective Spangle
Folded Lock-Seam Construction
Cost-Effective Corrosion Resistance

見積もりリクエスト製品案内

商品紹介

The Aluzinc-coated steel fan filter unit uses aluminium-zinc metallic-coated sheet for the plenum, access covers and formed mounting edges. The characteristic crystalline spangle remains visible, making the housing easy to distinguish from brushed stainless steel. Folded lock seams create rigid edges without extensive welding, while zinc-compatible clips and passivated fasteners limit dissimilar-metal contact. The material is intended for clean ceiling voids where a natural metallic finish and improved atmospheric corrosion resistance are required without the mass and cost of an all-stainless enclosure.

主要な特徴

The aluminium-zinc coating protects cut and formed sheet surfaces from normal ceiling-plenum humidity and condensation exposure.

A formed lock-seam casing gains stiffness from folded edges while keeping the module comparatively light.

The natural metallic surface eliminates a paint layer that could be scratched during overhead handling.

Compatible clips, screws and gasket retainers reduce avoidable galvanic contact at service points.

お客様の製品に関する懸念事項

A metallic FFU housing must resist routine plenum humidity and installation scratches without introducing unnecessary stainless-steel cost.

Paint damage during ceiling installation exposes ordinary steel edges before the room is commissioned.The metallic aluminium-zinc coating remains protective even where no decorative powder coating is applied.

A heavy stainless enclosure adds load to a lightweight modular ceiling grid.Formed Aluzinc sheet provides useful casing stiffness at a lower enclosure mass.

Condensation above the ceiling creates white rust and staining on basic galvanized panels.The aluminium-zinc coating improves atmospheric corrosion resistance in normal service conditions.

Mixed clips and fasteners leave localized corrosion marks around removable covers.Zinc-compatible hardware and isolating washers maintain a more consistent material interface.

典型的な用途

General pharmaceutical cleanroom ceilingsElectronics production facilitiesHumid utility plenums above clean areasCost-sensitive modular cleanroomsIndustrial laboratories with metallic ceiling systems

技術的なパラメータ

Typical construction ranges for an Aluzinc-coated steel fan filter unit are listed below.

コア材料	Aluminium-zinc coated steel plenum, centrifugal fan assembly and micro-glass HEPA or ULPA final-filter pack
パネルの厚さ	300-400 mm overall module depth
有効幅	575 — 1170 mm 公称天井グリッド幅
最大長さ	最大 1170 mm 標準モジュール長
鋼鉄の厚さを直面する	0.8-1.2 mm Aluzinc or Galvalume coated steel sheet
コア密度	Approximately 80-110 kg/m³ nominal compacted density of the micro-glass filter pack
熱伝導率	Approximately 0.035-0.045 W/(m·K) for the dry micro-glass pack inside the Aluzinc-coated FFU housing
表面仕上げ	Natural passivated Aluzinc spangle with optional powder-coated cleanroom-side diffuser
ジョイントタイプ	Folded lock-seam plenum with gasketed ceiling flange and compression-sealed removable filter frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Natural spangled or white powder-coated exteriorAC or EC centrifugal fanGasketed HEPA or gel-seal ULPA filter optionTool-free upper access or clean-side filter replacement

Planning a Aluzinc-Coated Steel Fan Filter Unit specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する