Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Sensor de velocidade do ar
An insertion-type hot-film sensor that measures cleanroom duct air velocity directly and provides a linear signal for control or monitoring.
- Hot-Film Velocity Measurement
- Adjustable Probe Insertion
- Selectable Velocity Ranges
- Analog Output Options
Introdução do produto
The duct air velocity sensor places a heated-film element in the moving airstream and determines velocity from the heat removed by the flow. A graduated stainless probe and adjustable flange position the sensing tip away from the duct boundary layer. Direction markings help align the element with the airflow, while selectable ranges match low- and high-velocity duct applications. The electronics provide a linear voltage or current output and can include a separate temperature signal for HVAC diagnostics.
Características-chave
An adjustable mounting flange places the sensing element at the selected duct depth.
Directional markings prevent installation with the element facing the wrong way.
Selectable output ranges improve signal resolution for different cleanroom duct velocities.
Preocupações do produto do cliente
A duct velocity sensor can be accurate only when its probe is oriented correctly and located outside strong turbulence or the wall boundary layer.
The probe is installed too close to the duct wall and reads a low local velocity.Graduated insertion and an adjustable flange place the element at a representative depth.
The sensor is rotated away from the airflow direction.A visible direction arrow aligns the hot-film element with the moving air.
One wide range gives weak resolution at normal low-speed operation.Selectable velocity ranges match the electrical span to the actual duct condition.
Dust accumulation changes thermal response over time.A smooth protected hot-film design reduces exposed geometry and allows planned inspection.
Aplicações típicas
Cleanroom supply-air ductsReturn and exhaust branchesAHU airflow verificationLow-velocity process ventilation
Parâmetros técnicos
Typical materials and dimensions for an insertion hot-film duct air velocity sensor are shown below.
| Material principal | Hot-film sensing element in 304 stainless steel probe with ABS and polycarbonate electronics head |
|---|---|
| Painel de espessura | 35-55 mm electronics-head depth |
| Largura efetiva | 70-100 mm housing width |
| Comprimento máximo | Up to 210 mm adjustable probe length |
| Aço enfrentando espessura | 0.5-0.8 mm stainless steel probe tube |
| Densidade Core | 7900-8030 kg/m³ for stainless probe components |
| Condutividade térmica | 14-17 W/(m·K) for 304 stainless steel probe |
| Superfície acabado | Satin stainless probe with light-gray housing and blue airflow-direction marking |
| Tipo conjunto | Adjustable duct flange with gasket, M16 cable entry and screw terminals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Low, medium or high velocity rangeVoltage or 4-20 mA outputAir temperature outputHeavy-environment probe
Planning a Air Velocity Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
