İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Hava Hızı Sensörü
An insertion-type hot-film sensor that measures cleanroom duct air velocity directly and provides a linear signal for control or monitoring.
- Hot-Film Velocity Measurement
- Adjustable Probe Insertion
- Selectable Velocity Ranges
- Analog Output Options
Ürün tanıtımı
The duct air velocity sensor places a heated-film element in the moving airstream and determines velocity from the heat removed by the flow. A graduated stainless probe and adjustable flange position the sensing tip away from the duct boundary layer. Direction markings help align the element with the airflow, while selectable ranges match low- and high-velocity duct applications. The electronics provide a linear voltage or current output and can include a separate temperature signal for HVAC diagnostics.
Ana Özellikler
An adjustable mounting flange places the sensing element at the selected duct depth.
Directional markings prevent installation with the element facing the wrong way.
Selectable output ranges improve signal resolution for different cleanroom duct velocities.
Müşteri Ürün Sorunları
A duct velocity sensor can be accurate only when its probe is oriented correctly and located outside strong turbulence or the wall boundary layer.
The probe is installed too close to the duct wall and reads a low local velocity.Graduated insertion and an adjustable flange place the element at a representative depth.
The sensor is rotated away from the airflow direction.A visible direction arrow aligns the hot-film element with the moving air.
One wide range gives weak resolution at normal low-speed operation.Selectable velocity ranges match the electrical span to the actual duct condition.
Dust accumulation changes thermal response over time.A smooth protected hot-film design reduces exposed geometry and allows planned inspection.
Tipik uygulamalar
Cleanroom supply-air ductsReturn and exhaust branchesAHU airflow verificationLow-velocity process ventilation
Teknik parametreler
Typical materials and dimensions for an insertion hot-film duct air velocity sensor are shown below.
| Temel malzemeler | Hot-film sensing element in 304 stainless steel probe with ABS and polycarbonate electronics head |
|---|---|
| Panel kalınlığı | 35-55 mm electronics-head depth |
| Effective Width (Etkili Genişlik) | 70-100 mm housing width |
| Maksimum uzunluk | Up to 210 mm adjustable probe length |
| Çelik yüz yüze kalınlığı | 0.5-0.8 mm stainless steel probe tube |
| Core Density (Çekirdek Yoğunluğu) | 7900-8030 kg/m³ for stainless probe components |
| Termal İletkenlik | 14-17 W/(m·K) for 304 stainless steel probe |
| Yüzey bitirme | Satin stainless probe with light-gray housing and blue airflow-direction marking |
| Ortak tip | Adjustable duct flange with gasket, M16 cable entry and screw terminals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Low, medium or high velocity rangeVoltage or 4-20 mA outputAir temperature outputHeavy-environment probe
Planning a Air Velocity Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
