Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Sistem Kontrol VAV
A pressure-independent variable air volume package that measures branch airflow and regulates a VAV damper across changing duct static pressure.
- Pressure-Independent Airflow
- Integrated Flow Measurement
- Minimum and Maximum Limits
- Networked Actuator Feedback
Perkenalan produk
The VAV control system integrates a differential pressure sensor, airflow calculation, controller and direct-coupled actuator on a factory-assembled terminal. It maintains the requested airflow even when upstream duct pressure varies within the operating range. Configurable minimum and maximum limits protect ventilation requirements and cap excessive branch flow. Supply, return and exhaust terminals can exchange airflow values with room pressure logic, while network communication exposes actual volume, setpoint, damper position and alarms to the supervisory system.
Fitur utama:
Factory-arranged sensor tubing and actuator linkage reduce field assembly variables.
Minimum and maximum airflow limits keep operation within the terminal's useful control range.
Network feedback reports actual airflow, requested airflow and damper position separately.
Kekhawatiran produk pelanggan
A VAV branch must deliver stable air volume even as the main duct pressure changes with other terminal demands.
Airflow rises when other branches close and duct pressure increases.Pressure-independent measurement and damper control hold the requested branch volume.
A terminal cannot control accurately below its usable sensor range.Configured minimum airflow prevents operation in the unstable low-signal region.
Field-installed tubing is reversed or pinched during commissioning.Clearly identified high and low ports with short factory-routed tubing reduce connection errors.
The BMS sees actuator position but cannot verify delivered air volume.Independent airflow feedback confirms actual branch performance rather than inferred damper movement.
Aplikasi yang Tipis
Cleanroom supply-air terminalsLaboratory exhaust branchesAirlock transfer airflowVariable-occupancy controlled rooms
Parameter teknis
Typical materials and dimensions for a pressure-independent cleanroom VAV terminal are shown below.
| Bahan inti | Galvanized steel VAV casing with aluminum sensing cross, polymer controller and copper motor windings |
|---|---|
| Ketebalan Panel (Panel Thickness) | 180-450 mm terminal depth |
| Efektif lebar | 150-800 mm nominal duct width or diameter |
| Panjang maksimum | Up to 1200 mm terminal assembly length |
| Baja menghadap ketebalan | 0.8-1.2 mm galvanized steel casing |
| Kepadatan inti (core density) | 7800-8050 kg/m³ for steel casing and damper components |
| Konduktivitas Termal (Thermal Conductivity) | 45-60 W/(m·K) for galvanized steel structural parts |
| Permukaan selesai | Clean zinc-coated steel casing with white controller and blue or orange actuator accent |
| Jenis Bersama | Circular spigot or rectangular flange with integral averaging pickup and direct-coupled actuator |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Circular or rectangular terminalSupply, return or exhaust dutySpring-return actuatorBACnet MS/TP or Modbus RTU
Planning a VAV Control System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
