Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumsteuerung und Umweltüberwachungssysteme
VAV-Kontrollsystem
A pressure-independent variable air volume package that measures branch airflow and regulates a VAV damper across changing duct static pressure.
- Pressure-Independent Airflow
- Integrated Flow Measurement
- Minimum and Maximum Limits
- Networked Actuator Feedback
Produkteinführung
The VAV control system integrates a differential pressure sensor, airflow calculation, controller and direct-coupled actuator on a factory-assembled terminal. It maintains the requested airflow even when upstream duct pressure varies within the operating range. Configurable minimum and maximum limits protect ventilation requirements and cap excessive branch flow. Supply, return and exhaust terminals can exchange airflow values with room pressure logic, while network communication exposes actual volume, setpoint, damper position and alarms to the supervisory system.
Key Features
Factory-arranged sensor tubing and actuator linkage reduce field assembly variables.
Minimum and maximum airflow limits keep operation within the terminal's useful control range.
Network feedback reports actual airflow, requested airflow and damper position separately.
Kunden Produktbedenken
A VAV branch must deliver stable air volume even as the main duct pressure changes with other terminal demands.
Airflow rises when other branches close and duct pressure increases.Pressure-independent measurement and damper control hold the requested branch volume.
A terminal cannot control accurately below its usable sensor range.Configured minimum airflow prevents operation in the unstable low-signal region.
Field-installed tubing is reversed or pinched during commissioning.Clearly identified high and low ports with short factory-routed tubing reduce connection errors.
The BMS sees actuator position but cannot verify delivered air volume.Independent airflow feedback confirms actual branch performance rather than inferred damper movement.
Typische Anwendungen
Cleanroom supply-air terminalsLaboratory exhaust branchesAirlock transfer airflowVariable-occupancy controlled rooms
Technische Parameter
Typical materials and dimensions for a pressure-independent cleanroom VAV terminal are shown below.
| Core Material | Galvanized steel VAV casing with aluminum sensing cross, polymer controller and copper motor windings |
|---|---|
| Panel Dicke | 180-450 mm terminal depth |
| Effektive Breite | 150-800 mm nominal duct width or diameter |
| Maximale Länge | Up to 1200 mm terminal assembly length |
| Stahl facing Dicke | 0.8-1.2 mm galvanized steel casing |
| Kerndichte | 7800-8050 kg/m³ for steel casing and damper components |
| Thermische Leitfähigkeit | 45-60 W/(m·K) for galvanized steel structural parts |
| Oberfläche Finish | Clean zinc-coated steel casing with white controller and blue or orange actuator accent |
| Gemeinsamer Typ | Circular spigot or rectangular flange with integral averaging pickup and direct-coupled actuator |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Circular or rectangular terminalSupply, return or exhaust dutySpring-return actuatorBACnet MS/TP or Modbus RTU
Planning a VAV Control System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
