English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
تنظيف الغرف النظيفة والتطهير والتعقيم
Wet وجاف فراغ غرف الأبحاث
Stainless-steel wet and dry cleanroom vacuum with liquid-overfill protection, removable recovery tank and sealed high-efficiency filtration.
- Combined wet and dry recovery
- Mechanical liquid-overfill protection
- Removable stainless-steel tank
مقدمة المنتج
The Wet and Dry Cleanroom Vacuum recovers both dry particulate and nonflammable process liquids without changing the basic mobile platform. A smooth stainless-steel body and detachable tank support cleaning and controlled emptying. The wet pickup path incorporates a mechanical float to protect the motor, while upstream fine-dust filtration and a downstream HEPA or ULPA stage control particulate exhaust during dry use. A vacuum gauge allows operators to monitor filter loading.
الخصائص الرئيسية
Mechanical float interrupts suction before liquid overfill.
Removable stainless-steel tank simplifies draining and sanitation.
Upstream fine-dust and downstream high-efficiency filter stages.
Smooth cleanable exterior with compact mobile footprint.
Vacuum gauge indicates changing filter condition.
مخاوف المنتج للعملاء
The unit addresses liquid overfill, tank sanitation, exhaust control and filter-condition visibility.
Liquid reaching the motorA mechanical float closes the suction path near the maximum liquid level.
Difficult tank cleaningThe removable stainless vessel can be drained, washed and inspected separately.
Fine dust in exhaustUpstream dust media and downstream high-efficiency filtration provide staged control.
Unexpected suction lossA vacuum gauge gives an immediate indication of filter restriction.
تطبيقات نموذجية
Cleanroom liquid-spill responseDry housekeeping in pharmaceutical productionSemiconductor and microelectronics controlled areasEquipment washdown residue recoveryLaboratories requiring one mobile wet/dry unit
المعلمات الفنية
The following configuration supports controlled recovery of nonflammable liquids and dry particulate.
| المواد الأساسية | Type 304 stainless steel; Type 316L tank optional |
|---|---|
| سمك اللوحة | 0.9–1.2 mm enclosure sheet thickness |
| العرض الفعال | 560 mm nominal body width |
| الحد الأقصى الطول | 650 mm nominal body length, excluding hose |
| الصلب يواجه سمك | 1.0 mm nominal recovery-tank wall |
| الكثافة الأساسية | 7900 كغ / م3 كثافة الفولاذ المقاوم للصدأ الاسمية |
| الموصلية الحرارية | 15 W/(m·K) nominal for stainless-steel body material |
| إنهاء السطح | Brushed or electropolished stainless steel |
| نوع المشترك | Gasketed clamp closure with sealed hose coupling and drain valve |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
H14 HEPA or U15 ULPA final filtrationType 304 or 316L recovery containerConductive or autoclavable hose and toolsDrain valve and disposable liner configurationsRegional voltage selection
Planning a Wet and Dry Cleanroom Vacuum specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
