English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Уборка, дезинфекция и стерилизация чистых помещений
Мокрый и сухой вакуум для чистых помещений
Stainless-steel wet and dry cleanroom vacuum with liquid-overfill protection, removable recovery tank and sealed high-efficiency filtration.
- Combined wet and dry recovery
- Mechanical liquid-overfill protection
- Removable stainless-steel tank
Введение продукции
The Wet and Dry Cleanroom Vacuum recovers both dry particulate and nonflammable process liquids without changing the basic mobile platform. A smooth stainless-steel body and detachable tank support cleaning and controlled emptying. The wet pickup path incorporates a mechanical float to protect the motor, while upstream fine-dust filtration and a downstream HEPA or ULPA stage control particulate exhaust during dry use. A vacuum gauge allows operators to monitor filter loading.
Основные характеристики
Mechanical float interrupts suction before liquid overfill.
Removable stainless-steel tank simplifies draining and sanitation.
Upstream fine-dust and downstream high-efficiency filter stages.
Smooth cleanable exterior with compact mobile footprint.
Vacuum gauge indicates changing filter condition.
Обеспокоенность клиентов продуктами
The unit addresses liquid overfill, tank sanitation, exhaust control and filter-condition visibility.
Liquid reaching the motorA mechanical float closes the suction path near the maximum liquid level.
Difficult tank cleaningThe removable stainless vessel can be drained, washed and inspected separately.
Fine dust in exhaustUpstream dust media and downstream high-efficiency filtration provide staged control.
Unexpected suction lossA vacuum gauge gives an immediate indication of filter restriction.
Типичные приложения
Cleanroom liquid-spill responseDry housekeeping in pharmaceutical productionSemiconductor and microelectronics controlled areasEquipment washdown residue recoveryLaboratories requiring one mobile wet/dry unit
Технические параметры
The following configuration supports controlled recovery of nonflammable liquids and dry particulate.
| Основной материал | Type 304 stainless steel; Type 316L tank optional |
|---|---|
| Толщина панели | 0.9–1.2 mm enclosure sheet thickness |
| эффективная ширина | 560 mm nominal body width |
| Максимальная длина | 650 mm nominal body length, excluding hose |
| Толщина линий стали | 1.0 mm nominal recovery-tank wall |
| Плотность ядра | 7900 kg/m³ nominal stainless-steel density |
| Теплопроводимость | 15 W/(m·K) nominal for stainless-steel body material |
| Поверхностная отделка | Brushed or electropolished stainless steel |
| Объединенный тип | Gasketed clamp closure with sealed hose coupling and drain valve |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
H14 HEPA or U15 ULPA final filtrationType 304 or 316L recovery containerConductive or autoclavable hose and toolsDrain valve and disposable liner configurationsRegional voltage selection
Planning a Wet and Dry Cleanroom Vacuum specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
