English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
FFU ومعدات تنقية الهواء الطرفية
Wall-mounted غرف نظيفة لتنقية الهواء
A slim wall-mounted recirculation unit that filters room air through accessible prefilter and HEPA stages while keeping cleanroom floor area clear.
- Floor-Space-Saving Mount
- Accessible Front Filters
- Quiet EC Recirculation
- Upward Wall Discharge
مقدمة المنتج
The wall-mounted cleanroom air purifier uses a shallow powder-coated cabinet with a lower return-air grille, EC fan and sealed HEPA filter above the intake. Filtered air leaves through the upper discharge louvre and mixes along the wall and ceiling instead of blowing directly across a workbench. A hinged or removable front panel permits filter access from the room side, and a reinforced bracket transfers cabinet weight to the supporting wall. The purifier supplements local recirculation and does not replace the make-up air needed to control room pressure.
الخصائص الرئيسية
Lower return and upper discharge create a room-scale circulation path without a freestanding tower.
Front-access filter cassettes can be serviced without removing the wall bracket.
Variable EC operation supports quiet continuous air polishing near occupied work areas.
مخاوف المنتج للعملاء
Small controlled rooms may need supplemental HEPA recirculation but have no clear floor position for a mobile or freestanding purifier.
A floor purifier narrows the aisle and interferes with carts or cleaning equipment.The shallow wall-mounted cabinet keeps the floor and traffic path unobstructed.
Direct horizontal discharge disturbs papers or creates draughts at nearby workstations.The upper louvre directs filtered air along the wall-ceiling zone for gentler mixing.
Removing the complete purifier for a filter change damages wall finishes and services.Front-access cassettes allow the filters to be changed while the bracket and cabinet stay mounted.
A hidden blocked intake raises noise and reduces room-air circulation.The visible lower prefilter can be inspected and serviced before the final filter becomes overloaded.
تطبيقات نموذجية
Compact laboratory cleanroomsغرف إعداد المستشفىClean corridors and gowning areasMedical-device inspection roomsSmall controlled storage rooms
المعلمات الفنية
Typical physical ranges for a wall-mounted cleanroom air purifier are shown below.
| المواد الأساسية | Low-noise EC fan with washable or disposable prefilter and micro-glass H13-H14 HEPA final filter |
|---|---|
| سمك اللوحة | 180-350 mm installed cabinet depth |
| العرض الفعال | 600-1000 mm cabinet width |
| الحد الأقصى الطول | Up to 1200 mm cabinet height |
| الصلب يواجه سمك | 0.8-1.2 mm cleanroom-white powder-coated steel cabinet panels |
| الكثافة الأساسية | Approximately 90-120 kg/m³ compacted density of the HEPA pack installed in the wall-mounted air purifier |
| الموصلية الحرارية | Approximately 0.035-0.043 W/(m·K) for the HEPA pack installed in the wall-mounted recirculation path |
| إنهاء السطح | Smooth cleanroom-white powder coat with dark lower intake grille and blue status display |
| نوع المشترك | Reinforced wall bracket with gasketed front filter cassette and sealed upper discharge plenum |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
فلتر H13 أو H14 HEPAOptional molecular filter stageUpward or side discharge louvreLocal controller or remote BMS input
Planning a Wall-Mounted Cleanroom Air Purifier specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
