Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
FFU et équipement de purification de l'air terminal
Purificateur d'air de salle blanche mural
A slim wall-mounted recirculation unit that filters room air through accessible prefilter and HEPA stages while keeping cleanroom floor area clear.
- Floor-Space-Saving Mount
- Accessible Front Filters
- Quiet EC Recirculation
- Upward Wall Discharge
Introduction de produit
The wall-mounted cleanroom air purifier uses a shallow powder-coated cabinet with a lower return-air grille, EC fan and sealed HEPA filter above the intake. Filtered air leaves through the upper discharge louvre and mixes along the wall and ceiling instead of blowing directly across a workbench. A hinged or removable front panel permits filter access from the room side, and a reinforced bracket transfers cabinet weight to the supporting wall. The purifier supplements local recirculation and does not replace the make-up air needed to control room pressure.
Key Features
Lower return and upper discharge create a room-scale circulation path without a freestanding tower.
Front-access filter cassettes can be serviced without removing the wall bracket.
Variable EC operation supports quiet continuous air polishing near occupied work areas.
Préoccupations du client produit
Small controlled rooms may need supplemental HEPA recirculation but have no clear floor position for a mobile or freestanding purifier.
A floor purifier narrows the aisle and interferes with carts or cleaning equipment.The shallow wall-mounted cabinet keeps the floor and traffic path unobstructed.
Direct horizontal discharge disturbs papers or creates draughts at nearby workstations.The upper louvre directs filtered air along the wall-ceiling zone for gentler mixing.
Removing the complete purifier for a filter change damages wall finishes and services.Front-access cassettes allow the filters to be changed while the bracket and cabinet stay mounted.
A hidden blocked intake raises noise and reduces room-air circulation.The visible lower prefilter can be inspected and serviced before the final filter becomes overloaded.
Les applications typiques
Compact laboratory cleanroomsSalles de préparation hospitalièreClean corridors and gowning areasMedical-device inspection roomsSmall controlled storage rooms
Paramètres techniques
Typical physical ranges for a wall-mounted cleanroom air purifier are shown below.
| Matériaux de base | Low-noise EC fan with washable or disposable prefilter and micro-glass H13-H14 HEPA final filter |
|---|---|
| Panneau épaisseur | 180-350 mm installed cabinet depth |
| Largeur effective | 600-1000 mm cabinet width |
| Longueur maximale | Up to 1200 mm cabinet height |
| Acier face épaisseur | 0.8-1.2 mm cleanroom-white powder-coated steel cabinet panels |
| Densité Core | Approximately 90-120 kg/m³ compacted density of the HEPA pack installed in the wall-mounted air purifier |
| Conductivité thermique | Approximately 0.035-0.043 W/(m·K) for the HEPA pack installed in the wall-mounted recirculation path |
| surface finie | Smooth cleanroom-white powder coat with dark lower intake grille and blue status display |
| Type joint | Reinforced wall bracket with gasketed front filter cassette and sealed upper discharge plenum |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Filtre H13 ou H14 HEPA
parOptional molecular filter stageUpward or side discharge louvreLocal controller or remote BMS input
Planning a Wall-Mounted Cleanroom Air Purifier specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
