English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
ضوء غرفة نظيفة مثبتة على السطح
A fully enclosed ceiling light that mounts below a solid cleanroom panel where recessed installation is unavailable.
- No Ceiling Recess Required
- Hole-Free Smooth Housing
- Gasketed Lens Frame
- Vapor-Tight Cable Entry
مقدمة المنتج
The surface-mounted fixture fixes directly to a sealed ceiling plate and encloses its driver, wiring and optical chamber in one shallow rectangular body. Radiused housing edges, concealed mounting points and a smooth lens face allow the exterior to be wiped without reaching into a ceiling opening. A gasketed access plate accepts sealed conduit or cable glands from above or at the end of the housing.
الخصائص الرئيسية
Radiused exposed edges support continuous wiping around the fixture.
The perimeter gasket compresses evenly under retained frame fasteners.
A sealed entry plate organizes incoming power without an open knockout.
A broad opal lens limits harsh luminance beneath low ceilings.
مخاوف المنتج للعملاء
Surface fixtures are easy to retrofit but can introduce ledges, exposed fasteners and unsealed wiring entries if not purpose designed.
Existing ceilings cannot accommodate a recessed back box.The complete housing installs below the panel with only sealed fixing and cable penetrations.
Sharp enclosure folds trap residue along the ceiling.Rounded transitions and a smooth back perimeter reduce inaccessible crevices.
Conduit knockouts allow moisture into the electrical chamber.A gasketed access plate accepts a matched vapor-tight gland.
Frequent lens removal weakens loose perimeter screws.Retained hinges or cables and captive fasteners control the service frame.
تطبيقات نموذجية
Retrofit cleanroomsLow-plenum controlled roomsFood and medical packagingClean utility corridors
المعلمات الفنية
Typical configurable construction ranges for a surface-mounted cleanroom LED luminaire are listed below.
| المواد الأساسية | Formed sheet-steel or stainless housing with LED modules, electronic driver and polymer diffuser |
|---|---|
| سمك اللوحة | 85-155 mm complete surface housing depth |
| العرض الفعال | 300-650 mm exposed fixture width |
| الحد الأقصى الطول | Up to 1250 mm overall luminaire length |
| الصلب يواجه سمك | 0.9-1.2 mm formed steel housing and lens frame |
| الكثافة الأساسية | Approximately 7850-8000 kg/m³ for steel or stainless housing material |
| الموصلية الحرارية | 14-60 W/(m·K) depending on stainless or carbon-steel housing |
| إنهاء السطح | Smooth white powder coat or fine-brushed stainless steel with an opal lens |
| نوع المشترك | Closed-back surface body with continuous lens gasket and vapor-tight cable gland plate |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
White coated steel or stainless bodySquare or rectangular formatsTop or end cable entryIntegral emergency driver
Planning a Surface-Mounted Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
