İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Yüzey monte temiz oda ışığı
A fully enclosed ceiling light that mounts below a solid cleanroom panel where recessed installation is unavailable.
- No Ceiling Recess Required
- Hole-Free Smooth Housing
- Gasketed Lens Frame
- Vapor-Tight Cable Entry
Ürün tanıtımı
The surface-mounted fixture fixes directly to a sealed ceiling plate and encloses its driver, wiring and optical chamber in one shallow rectangular body. Radiused housing edges, concealed mounting points and a smooth lens face allow the exterior to be wiped without reaching into a ceiling opening. A gasketed access plate accepts sealed conduit or cable glands from above or at the end of the housing.
Ana Özellikler
Radiused exposed edges support continuous wiping around the fixture.
The perimeter gasket compresses evenly under retained frame fasteners.
A sealed entry plate organizes incoming power without an open knockout.
A broad opal lens limits harsh luminance beneath low ceilings.
Müşteri Ürün Sorunları
Surface fixtures are easy to retrofit but can introduce ledges, exposed fasteners and unsealed wiring entries if not purpose designed.
Existing ceilings cannot accommodate a recessed back box.The complete housing installs below the panel with only sealed fixing and cable penetrations.
Sharp enclosure folds trap residue along the ceiling.Rounded transitions and a smooth back perimeter reduce inaccessible crevices.
Conduit knockouts allow moisture into the electrical chamber.A gasketed access plate accepts a matched vapor-tight gland.
Frequent lens removal weakens loose perimeter screws.Retained hinges or cables and captive fasteners control the service frame.
Tipik uygulamalar
Retrofit cleanroomsLow-plenum controlled roomsFood and medical packagingClean utility corridors
Teknik parametreler
Typical configurable construction ranges for a surface-mounted cleanroom LED luminaire are listed below.
| Temel malzemeler | Formed sheet-steel or stainless housing with LED modules, electronic driver and polymer diffuser |
|---|---|
| Panel kalınlığı | 85-155 mm complete surface housing depth |
| Effective Width (Etkili Genişlik) | 300-650 mm exposed fixture width |
| Maksimum uzunluk | Up to 1250 mm overall luminaire length |
| Çelik yüz yüze kalınlığı | 0.9-1.2 mm formed steel housing and lens frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850-8000 kg/m³ for steel or stainless housing material |
| Termal İletkenlik | 14-60 W/(m·K) depending on stainless or carbon-steel housing |
| Yüzey bitirme | Smooth white powder coat or fine-brushed stainless steel with an opal lens |
| Ortak tip | Closed-back surface body with continuous lens gasket and vapor-tight cable gland plate |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
White coated steel or stainless bodySquare or rectangular formatsTop or end cable entryIntegral emergency driver
Planning a Surface-Mounted Cleanroom Light specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
