English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
سلس الايبوكسي Terrazzo الأرضيات
A thin-set epoxy terrazzo system combining a coloured resin binder with selected mineral aggregates before grinding and polishing into a dense continuous surface.
- Joint-Free Terrazzo Field
- Custom Aggregate Blend
- Ground and Polished Finish
- Heavy-Traffic Surface
مقدمة المنتج
Seamless epoxy terrazzo flooring is installed as a thin resin-and-aggregate mortar over a prepared substrate. Pigmented epoxy binds marble, granite or selected decorative chips into a uniform layer that is mechanically ground, pore-filled and polished after curing. Divider strips can separate colours or define manageable placement fields without introducing open tile joints. The resulting floor is suited to controlled interiors that require a durable, low-maintenance finish with more visual depth than a single-colour resin coating.
الخصائص الرئيسية
Grinding and pore filling close the trowelled surface and produce a consistent matt, satin or gloss presentation.
Colour, chip size and divider layout can identify routes or room boundaries without applied floor graphics.
The 6–11 mm thin-set build-up reduces transition height compared with traditional thick cement terrazzo.
مخاوف المنتج للعملاء
A decorative controlled-area floor must remain continuous and serviceable while accommodating heavy traffic, colour zoning and cleaning routines.
Grouted tile grids create repeated lines that collect soil and complicate machine cleaning.The epoxy and aggregate are placed as a continuous mortar field with only planned divider and movement lines.
A plain monochrome coating does not support wayfinding or public-facing cleanroom areas.Pigmented binder, selected chips and metal divider strips create durable colour zones within the floor body.
Soft decorative finishes lose clarity under concentrated pedestrian and trolley traffic.A dense mineral-filled wearing layer is ground and sealed to withstand routine abrasion.
Inconsistent site mixes cause shade and aggregate distribution to vary between pours.Defined resin-to-aggregate ratios and controlled placement fields keep adjacent batches visually coordinated.
تطبيقات نموذجية
Pharmaceutical research corridorsHealthcare controlled-area lobbiesCleanroom reception and gowning zonesLaboratory circulation areasHigh-traffic technical facility entrances
المعلمات الفنية
Typical build-up data for a thin-set epoxy terrazzo floor with a mineral aggregate wearing layer are shown below.
| المواد الأساسية | Pigmented two-component epoxy binder with marble, granite or selected decorative aggregate |
|---|---|
| سمك اللوحة | 6–11 mm nominal installed terrazzo system thickness |
| العرض الفعال | 1000–3000 mm typical working-bay width during placement |
| الحد الأقصى الطول | Up to 8000 mm typical decorative field length between movement joints |
| الصلب يواجه سمك | 0 mm; the terrazzo wearing layer does not use a steel facing |
| الكثافة الأساسية | Approximately 2400–3200 kg/m³ for the cured epoxy-mineral composite |
| الموصلية الحرارية | Approximately 0.32–0.39 W/(m·K) for a 9–11 mm epoxy terrazzo build-up |
| إنهاء السطح | Mechanically ground and polished matt, satin or gloss finish with sealed pores |
| نوع المشترك | Continuous trowel-applied field with optional metal divider strips and substrate movement joints carried through |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Custom epoxy binder coloursMarble, granite or recycled glass aggregate blendsAluminum, brass, zinc or coloured divider stripsMatt, satin or high-gloss polishing schedule
Planning a Seamless Epoxy Terrazzo Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
