Complete epoxy terrazzo flooring sample with grey resin and mineral chips

Sistem Lantai Bilik Bersih

Lantai Terrazzo Epoxy lancar

A thin-set epoxy terrazzo system combining a coloured resin binder with selected mineral aggregates before grinding and polishing into a dense continuous surface.

Joint-Free Terrazzo Field
Custom Aggregate Blend
Ground and Polished Finish
Heavy-Traffic Surface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Seamless epoxy terrazzo flooring is installed as a thin resin-and-aggregate mortar over a prepared substrate. Pigmented epoxy binds marble, granite or selected decorative chips into a uniform layer that is mechanically ground, pore-filled and polished after curing. Divider strips can separate colours or define manageable placement fields without introducing open tile joints. The resulting floor is suited to controlled interiors that require a durable, low-maintenance finish with more visual depth than a single-colour resin coating.

Ciri-ciri Utama

A high aggregate content creates the characteristic terrazzo appearance while contributing to wear resistance under frequent pedestrian traffic.

Grinding and pore filling close the trowelled surface and produce a consistent matt, satin or gloss presentation.

Colour, chip size and divider layout can identify routes or room boundaries without applied floor graphics.

The 6–11 mm thin-set build-up reduces transition height compared with traditional thick cement terrazzo.

Kebimbangan Produk Pelanggan

A decorative controlled-area floor must remain continuous and serviceable while accommodating heavy traffic, colour zoning and cleaning routines.

Grouted tile grids create repeated lines that collect soil and complicate machine cleaning.The epoxy and aggregate are placed as a continuous mortar field with only planned divider and movement lines.

A plain monochrome coating does not support wayfinding or public-facing cleanroom areas.Pigmented binder, selected chips and metal divider strips create durable colour zones within the floor body.

Soft decorative finishes lose clarity under concentrated pedestrian and trolley traffic.A dense mineral-filled wearing layer is ground and sealed to withstand routine abrasion.

Inconsistent site mixes cause shade and aggregate distribution to vary between pours.Defined resin-to-aggregate ratios and controlled placement fields keep adjacent batches visually coordinated.

Permohonan yang biasa

Pharmaceutical research corridorsHealthcare controlled-area lobbiesCleanroom reception and gowning zonesLaboratory circulation areasHigh-traffic technical facility entrances

Parameter teknikal

Typical build-up data for a thin-set epoxy terrazzo floor with a mineral aggregate wearing layer are shown below.

Bahan Teras	Pigmented two-component epoxy binder with marble, granite or selected decorative aggregate
Ketebalan Panel	6–11 mm nominal installed terrazzo system thickness
Lebar berkesan	1000–3000 mm typical working-bay width during placement
Panjang maksimum	Up to 8000 mm typical decorative field length between movement joints
Keluli Menghadapi Ketebalan	0 mm; the terrazzo wearing layer does not use a steel facing
Ketumpatan teras	Approximately 2400–3200 kg/m³ for the cured epoxy-mineral composite
Kekonduksian Terma	Approximately 0.32–0.39 W/(m·K) for a 9–11 mm epoxy terrazzo build-up
Kemasan permukaan	Mechanically ground and polished matt, satin or gloss finish with sealed pores
Jenis Bersatu	Continuous trowel-applied field with optional metal divider strips and substrate movement joints carried through
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Custom epoxy binder coloursMarble, granite or recycled glass aggregate blendsAluminum, brass, zinc or coloured divider stripsMatt, satin or high-gloss polishing schedule

Planning a Seamless Epoxy Terrazzo Flooring specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami