English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
الصرف الصحي الطابق
Smooth-bore sanitary drain with a hygienic grate, radiused bowl and removable waste basket for frequent wet cleaning.
- Smooth Radiused Sump
- Tool-Free Service Access
- Removable Waste Basket
- Optional Odor Trap
مقدمة المنتج
The sanitary floor drain combines a formed stainless bowl, welded floor flange and removable top assembly for hygiene-controlled wet areas. Openable internals expose the sump and basket for inspection, while a sloped bowl directs water toward the selected outlet. Top dimensions, outlet orientation and flange profile can be matched to the finished floor without adding unnecessary exposed fasteners.
الخصائص الرئيسية
The grate and basket lift out without disturbing the embedded drain body.
A welded flange provides a continuous interface to resin, vinyl or tiled floor systems.
Optional trapping and load-rated grates adapt the drain to room use and traffic.
مخاوف المنتج للعملاء
Frequent-wash areas require fast drainage, accessible internals and a floor interface that does not create difficult-to-clean crevices.
Flat-bottomed sumps can retain standing water after cleaning.A formed sloped bowl directs liquid toward the matched outlet.
Fixed top assemblies make strainers difficult to inspect and clean.The grate and waste basket remove from above without tools.
Drain-to-floor junctions may become crevices or leak paths.A floor-specific welded flange creates a broad continuous finishing interface.
Traffic and wash practices vary between controlled rooms.Selectable grate load rating, top size, outlet and trap configuration match the operating area.
تطبيقات نموذجية
Hygienic corridorsPersonnel change roomsWash stationsProcess support rooms
المعلمات الفنية
The following ranges describe common stainless sanitary floor-drain construction; final top, outlet and grate selection depend on floor build-up, flow and wheel loading.
| المواد الأساسية | AISI 304 or 316L stainless steel drain bowl |
|---|---|
| سمك اللوحة | 1.2-2.0 mm formed body wall |
| العرض الفعال | 150-300 mm top width |
| الحد الأقصى الطول | Up to 400 mm overall body length |
| الصلب يواجه سمك | 1.5-2.0 mm exposed stainless top and flange |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless steel |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless steel |
| إنهاء السطح | Satin-finished or electropolished cleanable stainless steel |
| نوع المشترك | Continuously welded bowl with sanitary spigot outlet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L grade150-300 mm topDN50-DN110 outletLoad-rated grate and removable trap
Planning a Sanitary Floor Drain specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
