Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları

Sanitary Floor Drain

Smooth-bore sanitary drain with a hygienic grate, radiused bowl and removable waste basket for frequent wet cleaning.

Smooth Radiused Sump
Tool-Free Service Access
Removable Waste Basket
Optional Odor Trap

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The sanitary floor drain combines a formed stainless bowl, welded floor flange and removable top assembly for hygiene-controlled wet areas. Openable internals expose the sump and basket for inspection, while a sloped bowl directs water toward the selected outlet. Top dimensions, outlet orientation and flange profile can be matched to the finished floor without adding unnecessary exposed fasteners.

Ana Özellikler

A radiused stainless sump avoids sharp internal corners and supports routine wash-down.

The grate and basket lift out without disturbing the embedded drain body.

A welded flange provides a continuous interface to resin, vinyl or tiled floor systems.

Optional trapping and load-rated grates adapt the drain to room use and traffic.

Müşteri Ürün Sorunları

Frequent-wash areas require fast drainage, accessible internals and a floor interface that does not create difficult-to-clean crevices.

Flat-bottomed sumps can retain standing water after cleaning.A formed sloped bowl directs liquid toward the matched outlet.

Fixed top assemblies make strainers difficult to inspect and clean.The grate and waste basket remove from above without tools.

Drain-to-floor junctions may become crevices or leak paths.A floor-specific welded flange creates a broad continuous finishing interface.

Traffic and wash practices vary between controlled rooms.Selectable grate load rating, top size, outlet and trap configuration match the operating area.

Tipik uygulamalar

Hygienic corridorsPersonnel change roomsWash stationsProcess support rooms

Teknik parametreler

The following ranges describe common stainless sanitary floor-drain construction; final top, outlet and grate selection depend on floor build-up, flow and wheel loading.

Temel malzemeler	AISI 304 or 316L stainless steel drain bowl
Panel kalınlığı	1.2-2.0 mm formed body wall
Effective Width (Etkili Genişlik)	150-300 mm top width
Maksimum uzunluk	Up to 400 mm overall body length
Çelik yüz yüze kalınlığı	1.5-2.0 mm exposed stainless top and flange
Core Density (Çekirdek Yoğunluğu)	7900-8000 kg/m³ for stainless steel
Termal İletkenlik	14-16 W/(m·K) for stainless steel
Yüzey bitirme	Satin-finished or electropolished cleanable stainless steel
Ortak tip	Continuously welded bowl with sanitary spigot outlet
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

304 or 316L grade150-300 mm topDN50-DN110 outletLoad-rated grate and removable trap

Planning a Sanitary Floor Drain specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun