English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة المرافق الغرف النظيفة
نظام توليد المياه النقية
An integrated hygienic generation skid combining selected pretreatment, reverse osmosis and optional continuous electrodeionization for dependable purified process water.
- Integrated RO and polishing train
- Hygienic drainable process path
- Online water-quality monitoring
مقدمة المنتج
The system packages feed conditioning, membrane purification, optional EDI or UF polishing, instrumentation and automated controls into a coordinated generation train with interfaces for the storage and distribution loop.
الخصائص الرئيسية
Drainable hygienic piping
Conductivity and temperature monitoring
Startup quality diversion
Sanitization-ready options
PLC/HMI supervision
مخاوف المنتج للعملاء
A stable purified-water supply requires coordinated pretreatment, microbial control and generation-to-storage automation.
Feed changes upset final qualitySelect pretreatment and membrane stages from feed analysis and monitor critical quality signals online.
Microbial growth during idle periodsUse drainable geometry, controlled recirculation and a suitable thermal or chemical sanitization arrangement.
Off-quality startup water reaches storageApply automatic quality diversion until monitored parameters enter the accepted operating window.
Generation and loop controls conflictInterlock production, tank level, return quality and distribution demand through coordinated PLC logic.
تطبيقات نموذجية
Pharmaceutical ingredient and formulation waterBiotechnology process utilitiesHealthcare productionCosmetic manufacturingValidated cleaning and rinsing supply
المعلمات الفنية
The system is engineered around source-water analysis, required production rate, target water quality and selected sanitization strategy.
| المواد الأساسية | Thin-film composite RO membranes with optional EDI resin/membrane polishing modules |
|---|---|
| سمك اللوحة | Membrane, module and process component dimensions selected in mm by system capacity |
| العرض الفعال | Integrated skid width typically 1200–2800 mm, configuration dependent |
| الحد الأقصى الطول | Integrated skid length typically up to 8000 mm, configuration dependent |
| الصلب يواجه سمك | Stainless-steel frame and enclosure sheet typically 1.5–3.0 mm |
| الكثافة الأساسية | Structural material density approximately 7930 kg/m³ for 304 stainless steel |
| الموصلية الحرارية | Stainless-steel structural components approximately 16.2 W/(m·K) at ambient temperature |
| إنهاء السطح | Brushed exterior stainless steel with controlled hygienic wetted-surface finish |
| نوع المشترك | Orbital-welded hygienic tubing with sanitary clamp service connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single-pass or double-pass ROContinuous EDI polishingUF final barrierHot-water sanitizationIntegrated dosingTOC monitoring interfaceRemote data historian communication
Planning a Purified Water Generation System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
