クリーンルーム機器と無菌施設の必需品のワンストップサプライヤー国際プロジェクト支援
Open mobile navigationClose mobile navigation
クリーンルームユーティリティシステム

浄水生成システム

An integrated hygienic generation skid combining selected pretreatment, reverse osmosis and optional continuous electrodeionization for dependable purified process water.
  • Integrated RO and polishing train
  • Hygienic drainable process path
  • Online water-quality monitoring
見積もりリクエスト 製品案内

商品紹介

The system packages feed conditioning, membrane purification, optional EDI or UF polishing, instrumentation and automated controls into a coordinated generation train with interfaces for the storage and distribution loop.

主要な特徴

Integrated multi-stage purification

Drainable hygienic piping

Conductivity and temperature monitoring

Startup quality diversion

Sanitization-ready options

PLC/HMI supervision

お客様の製品に関する懸念事項

A stable purified-water supply requires coordinated pretreatment, microbial control and generation-to-storage automation.

Feed changes upset final qualitySelect pretreatment and membrane stages from feed analysis and monitor critical quality signals online.
Microbial growth during idle periodsUse drainable geometry, controlled recirculation and a suitable thermal or chemical sanitization arrangement.
Off-quality startup water reaches storageApply automatic quality diversion until monitored parameters enter the accepted operating window.
Generation and loop controls conflictInterlock production, tank level, return quality and distribution demand through coordinated PLC logic.

典型的な用途

Pharmaceutical ingredient and formulation waterBiotechnology process utilitiesHealthcare productionCosmetic manufacturingValidated cleaning and rinsing supply

技術的なパラメータ

The system is engineered around source-water analysis, required production rate, target water quality and selected sanitization strategy.

コア材料Thin-film composite RO membranes with optional EDI resin/membrane polishing modules
パネルの厚さMembrane, module and process component dimensions selected in mm by system capacity
有効幅Integrated skid width typically 1200–2800 mm, configuration dependent
最大長さIntegrated skid length typically up to 8000 mm, configuration dependent
鋼鉄の厚さを直面するStainless-steel frame and enclosure sheet typically 1.5–3.0 mm
コア密度構造材料密度 304 ステンレス鋼の場合約 7930 kg / m3
熱伝導率ステンレス鋼構造部品周囲温度で約 16.2 W / ( m · K )
表面仕上げBrushed exterior stainless steel with controlled hygienic wetted-surface finish
ジョイントタイプOrbital-welded hygienic tubing with sanitary clamp service connections
カスタマイズ意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-pass or double-pass ROContinuous EDI polishingUF final barrierHot-water sanitizationIntegrated dosingTOC monitoring interfaceRemote data historian communication

Planning a Purified Water Generation System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する
メール送信 WhatsApp WeChat

ホーム

製品

ニュース

会社概要

お問い合わせ