English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
خزانة تخزين النيتروجين
A four-chamber Type 304L stainless cabinet that distributes dry nitrogen through a side plenum and monitors relative humidity without exposing every shelf during access.
- Four independently gasketed chambers
- Side nitrogen distribution plenum
- Flowmeter and digital RH monitor
- Automatic relief and bleed valves
مقدمة المنتج
The nitrogen storage cabinet divides a tall Type 304L stainless enclosure into four independently accessed dry-storage chambers. A sealed side plenum distributes the nitrogen supply to each level, while individual relief-and-bleed valves prevent pressure from accumulating behind the gasketed clear doors. Perforated stainless shelves support moisture-sensitive components without obstructing gas circulation. A blue control strip carries the inlet flowmeter, regulator and green digital RH display, allowing cabinet conditions to be observed without opening a chamber. Lift-style compression latches pull each door evenly onto a mechanically retained blue gasket.
الخصائص الرئيسية
A common vertical plenum introduces nitrogen at every chamber instead of relying on slow migration from one inlet.
Relief-and-bleed valves release excess pressure while preserving a controlled purge path through the enclosure.
The external flowmeter and RH display keep gas adjustment and condition monitoring outside the storage volume.
مخاوف المنتج للعملاء
Low-humidity storage needs controlled gas distribution and minimal moisture recovery time after routine access.
Opening one large cabinet door replaces dry gas around every stored item with humid room air.Four independently sealed chambers restrict each access event to one shelf volume.
A single nitrogen inlet creates uneven purge conditions between upper and lower shelves.The full-height side plenum feeds each chamber through its own distribution branch.
Unregulated gas flow can pressurize the enclosure and strain door seals.Automatic relief-and-bleed valves provide a defined outlet as nitrogen enters each chamber.
Operators cannot distinguish low flow from a moisture excursion without opening the cabinet.An external flowmeter and digital RH display show gas delivery and chamber condition at the front panel.
تطبيقات نموذجية
Moisture-sensitive electronic component storageSemiconductor wafer and sensor holdingOptical coating material protectionLaboratory reagent dry storageMedical-device component staging
المعلمات الفنية
Typical configurable specifications for a four-chamber stainless nitrogen storage cabinet are listed below.
| المواد الأساسية | Type 304L stainless steel four-chamber enclosure with clear static-dissipative door windows, perforated shelves, nitrogen plenum, flowmeter and relief valves |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless enclosure, chamber dividers and perforated shelves |
| العرض الفعال | 635 mm overall cabinet width |
| الحد الأقصى الطول | 1664 mm maximum overall cabinet height |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304L stainless body, chamber frames and side distribution plenum |
| الكثافة الأساسية | 7900–8000 kg/m³ for Type 304L stainless steel |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304L stainless steel |
| إنهاء السطح | Brushed stainless enclosure with clear static-dissipative windows, blue mechanically retained door gaskets and blue control strip |
| نوع المشترك | Seam-welded divided enclosure with independently gasketed lift-latch doors, sealed side purge plenum, threaded gas inlet and automatic relief-and-bleed valves |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Manual flowmeter or automatic RH controllerThree-, six- or eight-chamber cabinet layoutsType 316L stainless constructionData logging and temperature sensing module
Planning a Nitrogen Storage Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
