Four-chamber stainless nitrogen storage cabinet with RH controller

Reinraummöbel und Produkte aus Edelstahl

Stickstoff-Speicher - Kabinett

A four-chamber Type 304L stainless cabinet that distributes dry nitrogen through a side plenum and monitors relative humidity without exposing every shelf during access.

Four independently gasketed chambers
Side nitrogen distribution plenum
Flowmeter and digital RH monitor
Automatic relief and bleed valves

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The nitrogen storage cabinet divides a tall Type 304L stainless enclosure into four independently accessed dry-storage chambers. A sealed side plenum distributes the nitrogen supply to each level, while individual relief-and-bleed valves prevent pressure from accumulating behind the gasketed clear doors. Perforated stainless shelves support moisture-sensitive components without obstructing gas circulation. A blue control strip carries the inlet flowmeter, regulator and green digital RH display, allowing cabinet conditions to be observed without opening a chamber. Lift-style compression latches pull each door evenly onto a mechanically retained blue gasket.

Key Features

Four separate doors limit the volume exchanged with room air when one shelf level is accessed.

A common vertical plenum introduces nitrogen at every chamber instead of relying on slow migration from one inlet.

Relief-and-bleed valves release excess pressure while preserving a controlled purge path through the enclosure.

The external flowmeter and RH display keep gas adjustment and condition monitoring outside the storage volume.

Kunden Produktbedenken

Low-humidity storage needs controlled gas distribution and minimal moisture recovery time after routine access.

Opening one large cabinet door replaces dry gas around every stored item with humid room air.Four independently sealed chambers restrict each access event to one shelf volume.

A single nitrogen inlet creates uneven purge conditions between upper and lower shelves.The full-height side plenum feeds each chamber through its own distribution branch.

Unregulated gas flow can pressurize the enclosure and strain door seals.Automatic relief-and-bleed valves provide a defined outlet as nitrogen enters each chamber.

Operators cannot distinguish low flow from a moisture excursion without opening the cabinet.An external flowmeter and digital RH display show gas delivery and chamber condition at the front panel.

Typische Anwendungen

Feuchtigkeitsempfindliche elektronische KomponentenlagerungSemiconductor wafer and sensor holdingOptical coating material protectionLaboratory reagent dry storageMedizinische Geräte-Komponenten - Staging

Technische Parameter

Typical configurable specifications for a four-chamber stainless nitrogen storage cabinet are listed below.

Core Material	Type 304L stainless steel four-chamber enclosure with clear static-dissipative door windows, perforated shelves, nitrogen plenum, flowmeter and relief valves
Panel Dicke	1.2–1.5 mm stainless enclosure, chamber dividers and perforated shelves
Effektive Breite	635 mm overall cabinet width
Maximale Länge	1664 mm maximum overall cabinet height
Stahl facing Dicke	1.2–1.5 mm Type 304L stainless body, chamber frames and side distribution plenum
Kerndichte	7900–8000 kg/m³ for Type 304L stainless steel
Thermische Leitfähigkeit	14–16 W/(m·K) for Type 304L stainless steel
Oberfläche Finish	Brushed stainless enclosure with clear static-dissipative windows, blue mechanically retained door gaskets and blue control strip
Gemeinsamer Typ	Seam-welded divided enclosure with independently gasketed lift-latch doors, sealed side purge plenum, threaded gas inlet and automatic relief-and-bleed valves
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Manual flowmeter or automatic RH controllerThree-, six- or eight-chamber cabinet layoutsType 316L stainless constructionData logging and temperature sensing module

Planning a Nitrogen Storage Cabinet specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team