English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
مربع تمرير الاحتواء السلبي للضغط
A transfer chamber held below adjacent-room pressure so leakage is drawn inward and routed to filtered exhaust.
- Negative Chamber Bias
- Filtered Exhaust
- Controlled Make-Up Air
- Pressure-Gated Interlocks
مقدمة المنتج
The negative-pressure containment pass box moves dusty, potent or odorous material without allowing a passive leak towards the support space. A variable-speed exhaust fan maintains the selected negative pressure, while a controlled make-up path avoids excessive suction at the door seals. A pressure signal controls the interlock logic and indicates when the chamber has recovered after a transfer.
الخصائص الرئيسية
A deliberate make-up air path limits high-velocity leakage through random gaps.
The clean-side door can remain inhibited until pressure recovers.
A sealed final-filter service panel separates captured material from the corridor.
Smooth welded internal surfaces support wipe-down after transfer.
مخاوف المنتج للعملاء
The chamber needs to keep leakage inward without making doors difficult to operate or disrupting adjacent spaces.
Exhaust force makes a door difficult to unlatch.Controlled make-up air and an adjustable setpoint limit the differential pressure.
Filter loading reduces extraction and reverses the leakage direction.Pressure-responsive fan control adjusts airflow as resistance changes.
Captured powder is exposed during routine filter service.A gasketed service housing keeps handling on the designated dirty side.
The next door opens before the chamber recovers.Pressure-gated interlocks delay release until the selected negative bias returns.
تطبيقات نموذجية
Potent compound transferPowder dispensing roomsHazardous sample handlingOdour-controlled process suites
المعلمات الفنية
Typical pressure-containment construction ranges for a negative-pressure pass box are listed below.
| المواد الأساسية | Welded SUS 304 or SUS 316L chamber with variable-speed exhaust, make-up inlet and HEPA final filter |
|---|---|
| سمك اللوحة | 80-150 mm sealed plenum and double-wall construction |
| العرض الفعال | 500-1200 mm clear chamber width |
| الحد الأقصى الطول | Up to 1500 mm chamber depth |
| الصلب يواجه سمك | 1.2-1.5 mm stainless-steel facing |
| الكثافة الأساسية | 35-40 kg/m³ polyurethane insulation around pressure and filter plenums |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) for polyurethane plenum insulation |
| إنهاء السطح | Brushed or electropolished stainless chamber with smooth coved internal corners |
| نوع المشترك | Pressure-tight welded body with gasketed interlocked doors and sealed filter-service panel |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Typical -10 to -50 Pa pressure rangeSafe-change exhaust filterRemote alarm contactsRoom-specific pressure setpoint
Planning a Negative-Pressure Containment Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
