English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Dش الهواء في الغرفة الباردة ذات درجة الحرارة المنخفضة
A thermally insulated personnel air shower with cold-rated door seals, moisture-resistant interior surfaces and drainable returns for chilled controlled areas.
- Thermally Insulated Shell
- Cold-Temperature Seals
- Drainable Return Path
- Condensation-Aware Design
مقدمة المنتج
The cold-room air shower combines garment cleaning with a shell designed to control heat gain and condensation at a chilled entrance. Closed-cell insulated panels and thermally separated door frames limit cold bridging, while stainless interior surfaces and sloped return areas accommodate moisture from temperature transitions. The filtered air circuit can be configured for demand operation to limit unnecessary fan runtime between entries.
الخصائص الرئيسية
Thermal-break door framing helps reduce cold bridging at frequently used openings.
Low-temperature gaskets retain flexibility through repeated chilled cycles.
Sloped stainless return areas guide condensate away from removable prefilters.
Demand-based operation can reduce heat input from fan running time.
مخاوف المنتج للعملاء
Temperature transitions introduce condensation, heat leakage and stiff door seals that are not addressed by a standard dry-room air shower.
Warm humid air condenses on cold internal metal.Closed-cell insulation and thermal breaks help stabilise exposed surface temperatures.
Ordinary gaskets harden during low-temperature cycling.Flexible low-temperature elastomer seals maintain compression around the door frame.
Condensate reaches the prefilter area.Sloped stainless return trays direct moisture away from the filter cassette.
Continuous blower running adds heat to the chilled room.Demand-based controls limit shower fan operation between personnel cycles.
تطبيقات نموذجية
Chilled food processingCold-chain pharmaceutical storageRefrigerated packaging roomsDairy hygiene entrances
المعلمات الفنية
Typical insulated construction ranges for a low-temperature personnel air shower are listed below.
| المواد الأساسية | PIR-insulated stainless enclosure with low-temperature seals, drainable prefilter returns and H13 HEPA recirculation |
|---|---|
| سمك اللوحة | 75-100 mm closed-cell insulated panels |
| العرض الفعال | 900-1500 mm clear cold-room passage width |
| الحد الأقصى الطول | Up to 2500 mm insulated chamber length |
| الصلب يواجه سمك | 1.0-1.2 mm stainless internal facing with insulated external skin |
| الكثافة الأساسية | 40-45 kg/m³ rigid PIR insulation |
| الموصلية الحرارية | 0.021-0.026 W/(m·K) for the closed-cell PIR core |
| إنهاء السطح | Brushed stainless interior with light-colour insulated exterior panels |
| نوع المشترك | Cam-lock thermal-break panel joints with low-temperature gaskets and sealed door-frame interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
75 mm or 100 mm PIR shellHeated door-frame perimeterStainless sloped drain panCold-rated motor and control enclosure
Planning a Low-Temperature Cold-Room Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
