Complete insulated low-temperature cold-room air shower with stainless interior

인력 및 재료 오염 제거 장비

저온 냉방 공기 샤워기

A thermally insulated personnel air shower with cold-rated door seals, moisture-resistant interior surfaces and drainable returns for chilled controlled areas.

Thermally Insulated Shell
Cold-Temperature Seals
Drainable Return Path
Condensation-Aware Design

견적 요청 제품 찾아보기

상품 소개

The cold-room air shower combines garment cleaning with a shell designed to control heat gain and condensation at a chilled entrance. Closed-cell insulated panels and thermally separated door frames limit cold bridging, while stainless interior surfaces and sloped return areas accommodate moisture from temperature transitions. The filtered air circuit can be configured for demand operation to limit unnecessary fan runtime between entries.

주요 기능

Thick closed-cell insulation reduces temperature transfer through the enclosure walls.

Thermal-break door framing helps reduce cold bridging at frequently used openings.

Low-temperature gaskets retain flexibility through repeated chilled cycles.

Sloped stainless return areas guide condensate away from removable prefilters.

Demand-based operation can reduce heat input from fan running time.

고객 제품 관심사

Temperature transitions introduce condensation, heat leakage and stiff door seals that are not addressed by a standard dry-room air shower.

Warm humid air condenses on cold internal metal.Closed-cell insulation and thermal breaks help stabilise exposed surface temperatures.

Ordinary gaskets harden during low-temperature cycling.Flexible low-temperature elastomer seals maintain compression around the door frame.

Condensate reaches the prefilter area.Sloped stainless return trays direct moisture away from the filter cassette.

Continuous blower running adds heat to the chilled room.Demand-based controls limit shower fan operation between personnel cycles.

일반적인 응용 프로그램

Chilled food processingCold-chain pharmaceutical storageRefrigerated packaging roomsDairy hygiene entrances

기술 매개변수

Typical insulated construction ranges for a low-temperature personnel air shower are listed below.

핵심 재료	PIR-insulated stainless enclosure with low-temperature seals, drainable prefilter returns and H13 HEPA recirculation
패널 두께	75-100 mm closed-cell insulated panels
유효 폭	900-1500 mm clear cold-room passage width
최대 길이	Up to 2500 mm insulated chamber length
강철 면면 두께	1.0-1.2 mm stainless internal facing with insulated external skin
코어 밀도	40-45 kg/m³ rigid PIR insulation
열전도도 (Thermal Conductivity)	0.021-0.026 W/(m·K) for the closed-cell PIR core
표면 마무리	Brushed stainless interior with light-colour insulated exterior panels
접합 유형	Cam-lock thermal-break panel joints with low-temperature gaskets and sealed door-frame interfaces
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

75 mm or 100 mm PIR shellHeated door-frame perimeterStainless sloped drain panCold-rated motor and control enclosure

Planning a Low-Temperature Cold-Room Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.