English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
محطة النظافة المتكاملة للموظفين
A guided personnel lane combining two-hand sanitizing, footwear sole cleaning and optional controlled exit equipment.
- Hand and sole hygiene in one lane
- Guided personnel passage
- Occupied-cycle controls
- Removable wet-zone modules
مقدمة المنتج
The Integrated Personnel Hygiene Station combines two-hand sanitizing and a rotating sole-cleaning track within one stainless steel entry lane. Personnel follow the fixed passage while hand ports and footwear modules operate according to the selected cycle logic. Brushes, drip trays and service panels are removable or accessible for routine sanitation, and compatible exit-control equipment can receive the station's configured completion output.
الخصائص الرئيسية
Presence sensors can limit brushes and liquid feeds to occupied cycles.
Two-hand positioning and sole cleaning can be configured as linked station stages.
Removable brush and drip-tray modules expose the wet zone for routine care.
The unit can be paired with compatible external exit-control equipment.
مخاوف المنتج للعملاء
Separate footwear and hand devices take up space and can leave staff uncertain about the intended sequence at a busy personnel entry.
Personnel use hand sanitizer but bypass the footwear-cleaning device.The guided lane places the sole-cleaning track within the same route as the hand ports.
Several standalone units create overlapping queues and fragmented service access.One coordinated stainless frame brings the main hygiene stages into a single passage.
Brushes and liquid hardware are difficult to clean when built into separate machines.Removable cassettes, drip trays and service panels give access to the station modules.
Continuous liquid flow increases unnecessary utility use when no one is entering.Presence sensing can activate the relevant circuits only during an occupied cycle.
تطبيقات نموذجية
Food processing production entrancesPharmaceutical support areasMedical consumables facilitiesCosmetic manufacturing hygiene barriersControlled ingredient preparation
المعلمات الفنية
Lane direction, brush type, hand-port arrangement and connected exit equipment can be selected for the facility entry workflow.
| المواد الأساسية | Polypropylene brush and fluid components in a welded SUS304 hygiene frame |
|---|---|
| سمك اللوحة | 1.5–2.0 mm stainless steel enclosure panels |
| العرض الفعال | 500–750 mm clear guided passage |
| الحد الأقصى الطول | 1800–3200 mm overall station length |
| الصلب يواجه سمك | 1.5–2.0 mm SUS304 |
| الكثافة الأساسية | 900–1100 kg/m³ for polypropylene brush cores |
| الموصلية الحرارية | 0.10–0.22 W/(m·K) for polymer process components |
| إنهاء السطح | Brushed SUS304 with non-slip grating and hygienic open-frame construction |
| نوع المشترك | Continuous welded frame with removable brush and hygiene-service modules |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Dry or wet sole-cleaning trackHand-wash module before sanitizingOne-way or return laneCompatible exit-control interface
Planning a Integrated Personnel Hygiene Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
