Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Station intégrée d'hygiène du personnel
A guided personnel lane combining two-hand sanitizing, footwear sole cleaning and optional controlled exit equipment.
- Hand and sole hygiene in one lane
- Guided personnel passage
- Occupied-cycle controls
- Removable wet-zone modules
Introduction de produit
The Integrated Personnel Hygiene Station combines two-hand sanitizing and a rotating sole-cleaning track within one stainless steel entry lane. Personnel follow the fixed passage while hand ports and footwear modules operate according to the selected cycle logic. Brushes, drip trays and service panels are removable or accessible for routine sanitation, and compatible exit-control equipment can receive the station's configured completion output.
Key Features
Presence sensors can limit brushes and liquid feeds to occupied cycles.
Two-hand positioning and sole cleaning can be configured as linked station stages.
Removable brush and drip-tray modules expose the wet zone for routine care.
The unit can be paired with compatible external exit-control equipment.
Préoccupations du client produit
Separate footwear and hand devices take up space and can leave staff uncertain about the intended sequence at a busy personnel entry.
Personnel use hand sanitizer but bypass the footwear-cleaning device.The guided lane places the sole-cleaning track within the same route as the hand ports.
Several standalone units create overlapping queues and fragmented service access.One coordinated stainless frame brings the main hygiene stages into a single passage.
Brushes and liquid hardware are difficult to clean when built into separate machines.Removable cassettes, drip trays and service panels give access to the station modules.
Continuous liquid flow increases unnecessary utility use when no one is entering.Presence sensing can activate the relevant circuits only during an occupied cycle.
Les applications typiques
Food processing production entrancesPharmaceutical support areasMedical consumables facilitiesCosmetic manufacturing hygiene barriersControlled ingredient preparation
Paramètres techniques
Lane direction, brush type, hand-port arrangement and connected exit equipment can be selected for the facility entry workflow.
| Matériaux de base | Polypropylene brush and fluid components in a welded SUS304 hygiene frame |
|---|---|
| Panneau épaisseur | 1.5–2.0 mm stainless steel enclosure panels |
| Largeur effective | 500–750 mm clear guided passage |
| Longueur maximale | 1800–3200 mm overall station length |
| Acier face épaisseur | 1.5–2.0 mm SUS304 |
| Densité Core | 900–1100 kg/m³ for polypropylene brush cores |
| Conductivité thermique | 0.10–0.22 W/(m·K) for polymer process components |
| surface finie | Brushed SUS304 with non-slip grating and hygienic open-frame construction |
| Type joint | Continuous welded frame with removable brush and hygiene-service modules |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Dry or wet sole-cleaning trackHand-wash module before sanitizingOne-way or return laneCompatible exit-control interface
Planning a Integrated Personnel Hygiene Station specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
