English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
صحية PVC خليج تنورة
A flexible PVC cove former and skirting system that turns resilient sheet flooring smoothly up the wall and closes the upper edge with a hygienic cap.
- Continuous Vinyl Turn-Up
- 20–38 mm Cove Radius
- Hot-Welded Seams
- 70–150 mm Wall Height
مقدمة المنتج
Hygienic PVC cove skirting uses a curved former at the wall base to support sheet vinyl as it rises from the floor. The flooring remains the visible surface through the bend, maintaining consistent colour and cleaning behaviour instead of adding a separate hard baseboard. Vertical and corner seams are grooved and hot welded, while a PVC capping or transition strip secures the top edge. Flexible profiles accommodate common cove radii and can be cut around internal or external corners without leaving a sharp floor junction.
الخصائص الرئيسية
Hot-welded sheet seams produce a closed connection at corners and along material joins.
A top capping strip protects the cut edge and creates a defined transition to the wall finish.
PVC components can be coordinated with homogeneous, heterogeneous and wet-area vinyl floor systems.
مخاوف المنتج للعملاء
A resilient floor must turn up the wall without cracking, trapping residue under a hollow bend or leaving an exposed cut edge.
Unsupported vinyl collapses into a crease where the floor meets the wall.A sized PVC former supports the covering through a consistent 20–38 mm radius.
Open mitres at internal corners allow wash water and residue behind the skirting.Corner pieces are shaped and the vinyl seams are hot welded after adhesion.
The cut top of a self-coved sheet lifts during repeated wiping.A matching cap or transition profile secures and seals the wall termination.
A separate decorative baseboard interrupts the floor colour and adds a lower seam.The installed floor covering continues over the former to create the visible skirting face.
تطبيقات نموذجية
Cleanroom sheet-vinyl floorsHospital controlled corridorsLaboratory changing roomsPharmaceutical support areasHygienic wet-cleaning rooms
المعلمات الفنية
Representative dimensions and materials for a PVC former, capping and welded vinyl skirting assembly are given below.
| المواد الأساسية | Flexible or semi-rigid PVC cove former and capping profile supporting resilient vinyl flooring |
|---|---|
| سمك اللوحة | 2.0–4.0 mm compatible resilient floor-covering thickness |
| العرض الفعال | 70–150 mm typical installed skirting height |
| الحد الأقصى الطول | 2000–3000 mm standard former or capping profile length |
| الصلب يواجه سمك | 0 mm; the cove components and visible covering contain no steel facing |
| الكثافة الأساسية | Approximately 1300–1450 kg/m³ for flexible and rigid PVC components |
| الموصلية الحرارية | Approximately 0.16–0.19 W/(m·K) for PVC profile material |
| إنهاء السطح | Smooth colour-matched vinyl skirting face with a flexible PVC top lip or cap |
| نوع المشترك | Adhesive-fixed cove former with hot-welded vinyl seams and capped wall termination |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
20, 32 or 38 mm cove former radius70–150 mm skirting heightOne-piece or separate former-and-cap systemColour-matched welding rod and corner accessories
Planning a Hygienic PVC Cove Skirting specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
