Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
Jupe en PVC hygiénique
A flexible PVC cove former and skirting system that turns resilient sheet flooring smoothly up the wall and closes the upper edge with a hygienic cap.
- Continuous Vinyl Turn-Up
- 20–38 mm Cove Radius
- Hot-Welded Seams
- 70–150 mm Wall Height
Introduction de produit
Hygienic PVC cove skirting uses a curved former at the wall base to support sheet vinyl as it rises from the floor. The flooring remains the visible surface through the bend, maintaining consistent colour and cleaning behaviour instead of adding a separate hard baseboard. Vertical and corner seams are grooved and hot welded, while a PVC capping or transition strip secures the top edge. Flexible profiles accommodate common cove radii and can be cut around internal or external corners without leaving a sharp floor junction.
Key Features
Hot-welded sheet seams produce a closed connection at corners and along material joins.
A top capping strip protects the cut edge and creates a defined transition to the wall finish.
PVC components can be coordinated with homogeneous, heterogeneous and wet-area vinyl floor systems.
Préoccupations du client produit
A resilient floor must turn up the wall without cracking, trapping residue under a hollow bend or leaving an exposed cut edge.
Unsupported vinyl collapses into a crease where the floor meets the wall.A sized PVC former supports the covering through a consistent 20–38 mm radius.
Open mitres at internal corners allow wash water and residue behind the skirting.Corner pieces are shaped and the vinyl seams are hot welded after adhesion.
The cut top of a self-coved sheet lifts during repeated wiping.A matching cap or transition profile secures and seals the wall termination.
A separate decorative baseboard interrupts the floor colour and adds a lower seam.The installed floor covering continues over the former to create the visible skirting face.
Les applications typiques
Cleanroom sheet-vinyl floorsHospital controlled corridorsLaboratory changing roomsPharmaceutical support areasHygienic wet-cleaning rooms
Paramètres techniques
Representative dimensions and materials for a PVC former, capping and welded vinyl skirting assembly are given below.
| Matériaux de base | Flexible or semi-rigid PVC cove former and capping profile supporting resilient vinyl flooring |
|---|---|
| Panneau épaisseur | 2.0–4.0 mm compatible resilient floor-covering thickness |
| Largeur effective | 70–150 mm typical installed skirting height |
| Longueur maximale | 2000–3000 mm standard former or capping profile length |
| Acier face épaisseur | 0 mm; the cove components and visible covering contain no steel facing |
| Densité Core | Approximately 1300–1450 kg/m³ for flexible and rigid PVC components |
| Conductivité thermique | Approximately 0.16–0.19 W/(m·K) for PVC profile material |
| surface finie | Smooth colour-matched vinyl skirting face with a flexible PVC top lip or cap |
| Type joint | Adhesive-fixed cove former with hot-welded vinyl seams and capped wall termination |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
20, 32 or 38 mm cove former radius70–150 mm skirting heightOne-piece or separate former-and-cap systemColour-matched welding rod and corner accessories
Planning a Hygienic PVC Cove Skirting specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
