Hygienic PVC cove skirting set with cove former cap strip and blue vinyl flooring

Sistem Lantai Bilik Bersih

Kebersihan PVC Cove Skirting

A flexible PVC cove former and skirting system that turns resilient sheet flooring smoothly up the wall and closes the upper edge with a hygienic cap.

Continuous Vinyl Turn-Up
20–38 mm Cove Radius
Hot-Welded Seams
70–150 mm Wall Height

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Hygienic PVC cove skirting uses a curved former at the wall base to support sheet vinyl as it rises from the floor. The flooring remains the visible surface through the bend, maintaining consistent colour and cleaning behaviour instead of adding a separate hard baseboard. Vertical and corner seams are grooved and hot welded, while a PVC capping or transition strip secures the top edge. Flexible profiles accommodate common cove radii and can be cut around internal or external corners without leaving a sharp floor junction.

Ciri-ciri Utama

The supported radius prevents sheet vinyl from creasing or bridging where it changes from horizontal to vertical.

Hot-welded sheet seams produce a closed connection at corners and along material joins.

A top capping strip protects the cut edge and creates a defined transition to the wall finish.

PVC components can be coordinated with homogeneous, heterogeneous and wet-area vinyl floor systems.

Kebimbangan Produk Pelanggan

A resilient floor must turn up the wall without cracking, trapping residue under a hollow bend or leaving an exposed cut edge.

Unsupported vinyl collapses into a crease where the floor meets the wall.A sized PVC former supports the covering through a consistent 20–38 mm radius.

Open mitres at internal corners allow wash water and residue behind the skirting.Corner pieces are shaped and the vinyl seams are hot welded after adhesion.

The cut top of a self-coved sheet lifts during repeated wiping.A matching cap or transition profile secures and seals the wall termination.

A separate decorative baseboard interrupts the floor colour and adds a lower seam.The installed floor covering continues over the former to create the visible skirting face.

Permohonan yang biasa

Cleanroom sheet-vinyl floorsHospital controlled corridorsLaboratory changing roomsPharmaceutical support areasHygienic wet-cleaning rooms

Parameter teknikal

Representative dimensions and materials for a PVC former, capping and welded vinyl skirting assembly are given below.

Bahan Teras	Flexible or semi-rigid PVC cove former and capping profile supporting resilient vinyl flooring
Ketebalan Panel	2.0–4.0 mm compatible resilient floor-covering thickness
Lebar berkesan	70–150 mm typical installed skirting height
Panjang maksimum	2000–3000 mm standard former or capping profile length
Keluli Menghadapi Ketebalan	0 mm; the cove components and visible covering contain no steel facing
Ketumpatan teras	Approximately 1300–1450 kg/m³ for flexible and rigid PVC components
Kekonduksian Terma	Approximately 0.16–0.19 W/(m·K) for PVC profile material
Kemasan permukaan	Smooth colour-matched vinyl skirting face with a flexible PVC top lip or cap
Jenis Bersatu	Adhesive-fixed cove former with hot-welded vinyl seams and capped wall termination
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

20, 32 or 38 mm cove former radius70–150 mm skirting heightOne-piece or separate former-and-cap systemColour-matched welding rod and corner accessories

Planning a Hygienic PVC Cove Skirting specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami