English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
FFU ومعدات تنقية الهواء الطرفية
FFU نظام شبكة السقف نظام التحكم المركزي
A sealed modular T-grid structure that coordinates FFUs, lights, blank panels and service modules while transferring their loads to wall supports or suspension rods.
- Modular FFU Bays
- Factory-Applied Gaskets
- Integrated Utility Support
- Replaceable Grid Components
مقدمة المنتج
The FFU ceiling grid system uses interlocking aluminium or stainless profiles to create repeatable bays for fan filter units, LED panels, blank tiles and utility penetrations. Factory-applied closed-cell gaskets seal the underside contact line, while splice clips, corner keys and hanger points maintain alignment across the ceiling field. Standard module pitches accept common FFU formats, and partial bays can be fitted with sealed infill panels. The system provides a coordinated structural and sealing interface; it does not replace the independent building structure required to carry the calculated ceiling loads.
الخصائص الرئيسية
Continuous closed-cell gasketing limits bypass paths between the grid and drop-in components.
Interlocking splice hardware keeps exposed ceiling lines straight without bulky room-side fasteners.
Dedicated suspension and perimeter members separate component loading from cleanroom wall panels.
مخاوف المنتج للعملاء
A dense FFU ceiling must remain sealed and visually aligned while carrying many service modules and still permitting future reconfiguration.
Small dimensional errors accumulate across a large ceiling and prevent FFUs from dropping into their bays.Factory-sized main runners, cross tees and positive splice keys hold a repeatable module pitch.
Air leaks through hard contacts between filters, lights and bare T-bar flanges.A continuous closed-cell gasket creates a compressible seal beneath each drop-in component.
Replacing one FFU requires dismantling neighbouring ceiling sections.Independent bays and removable hold-down hardware allow a single module to be lifted or lowered.
Uncoordinated lights and service penetrations overload isolated grid members.Load paths, suspension points and utility bays are arranged within one ceiling support layout.
تطبيقات نموذجية
Semiconductor ballroom ceilingsModular pharmaceutical cleanroomsMedical-device production suitesAerospace assembly clean zonesResearch laboratory cleanrooms
المعلمات الفنية
Typical material and module ranges for a gasketed FFU ceiling grid system are shown below.
| المواد الأساسية | 6063-T5 aluminium T-grid profiles with steel suspension rods and closed-cell PE or EPDM gaskets |
|---|---|
| سمك اللوحة | 38-75 mm nominal grid web depth |
| العرض الفعال | 600-1200 mm standard module pitch with metric or imperial bay layouts |
| الحد الأقصى الطول | Up to 6000 mm continuous primary runner length before a mechanical splice |
| الصلب يواجه سمك | 1.0-2.0 mm galvanized steel support plates or stainless component trays where fitted |
| الكثافة الأساسية | 30-80 kg/m³ nominal density of the closed-cell perimeter gasket |
| الموصلية الحرارية | 0.035-0.060 W/(m·K) for the closed-cell grid sealing gasket |
| إنهاء السطح | Cleanroom-white powder-coated aluminium, clear anodized aluminium or brushed 304 stainless steel |
| نوع المشترك | Interlocking T-bar splice clips and corner keys with gasketed drop-in module seats |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
600 × 600 or 600 × 1200 mm baysWall-supported or rod-suspended layoutPowder-coated aluminium or stainless finishFFU, light, blank panel and utility modules
Planning a FFU Ceiling Grid System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
