English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
لوحة الإغاثة من الانفجار
A lightweight engineered panel forming a defined pressure-relief boundary for process enclosures and ductwork.
- Defined Pressure-Relief Boundary
- Lightweight Panel Assembly
- Gasketed Retaining Frame
- Burst Indicator Option
مقدمة المنتج
The explosion relief panel closes a protected enclosure during normal operation and opens at an engineered differential pressure to release combustion gases toward a safe zone. Panel area, restraint and opening pressure depend on the enclosure strength, hazard and vent path. A perimeter gasket limits normal leakage, while optional indication confirms that the panel has opened.
الخصائص الرئيسية
Light panel construction supports rapid opening.
A gasketed frame maintains the normal process seal.
Burst indication can report relief operation to the control system.
مخاوف المنتج للعملاء
An enclosure exposed to rapid combustion needs a predictable relief path that does not compromise normal containment.
An arbitrary access panel opens at an unknown pressure.The relief assembly is engineered for a defined opening behavior and protected volume.
Normal air leakage disrupts process pressure control.A continuous perimeter gasket seals the panel during routine operation.
A released panel can become a projectile.Retention, hinge or tether arrangements control movement where the design requires them.
Operators may not know that a remote panel has opened.An optional burst switch reports relief operation and initiates shutdown logic.
تطبيقات نموذجية
Process equipment enclosuresDust-handling cabinetsClean manufacturing toolsProtected ventilation ducts
المعلمات الفنية
Typical construction ranges are listed below; relief area and opening pressure require hazard-specific engineering.
| المواد الأساسية | Stainless or coated steel relief skin with reinforced perimeter frame |
|---|---|
| سمك اللوحة | 0.5-2.0 mm relief skin depending on design |
| العرض الفعال | 300-1200 mm |
| الحد الأقصى الطول | Up to 2000 mm panel dimension |
| الصلب يواجه سمك | 0.5-2.0 mm relief panel surface |
| الكثافة الأساسية | 7850-8000 kg/m³ for steel components |
| الموصلية الحرارية | 14-60 W/(m·K) according to steel grade |
| إنهاء السطح | Satin stainless or durable protective coating |
| نوع المشترك | Gasketed bolted frame with engineered relief or hinged retention assembly |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Stainless relief skinHinged or retained panelBurst indication switchCustom rectangular dimensions
Planning a Explosion Relief Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
