Complete explosion relief panel and retaining frame in three-quarter view

클린룸 배수, 위생 및 안전 장비

폭발 릴리프 패널

A lightweight engineered panel forming a defined pressure-relief boundary for process enclosures and ductwork.

Defined Pressure-Relief Boundary
Lightweight Panel Assembly
Gasketed Retaining Frame
Burst Indicator Option

견적 요청 제품 찾아보기

상품 소개

The explosion relief panel closes a protected enclosure during normal operation and opens at an engineered differential pressure to release combustion gases toward a safe zone. Panel area, restraint and opening pressure depend on the enclosure strength, hazard and vent path. A perimeter gasket limits normal leakage, while optional indication confirms that the panel has opened.

주요 기능

A calibrated weak boundary relieves pressure before the host enclosure fails.

Light panel construction supports rapid opening.

A gasketed frame maintains the normal process seal.

Burst indication can report relief operation to the control system.

고객 제품 관심사

An enclosure exposed to rapid combustion needs a predictable relief path that does not compromise normal containment.

An arbitrary access panel opens at an unknown pressure.The relief assembly is engineered for a defined opening behavior and protected volume.

Normal air leakage disrupts process pressure control.A continuous perimeter gasket seals the panel during routine operation.

A released panel can become a projectile.Retention, hinge or tether arrangements control movement where the design requires them.

Operators may not know that a remote panel has opened.An optional burst switch reports relief operation and initiates shutdown logic.

일반적인 응용 프로그램

Process equipment enclosuresDust-handling cabinetsClean manufacturing toolsProtected ventilation ducts

기술 매개변수

Typical construction ranges are listed below; relief area and opening pressure require hazard-specific engineering.

핵심 재료	Stainless or coated steel relief skin with reinforced perimeter frame
패널 두께	0.5-2.0 mm relief skin depending on design
유효 폭	300-1200 mm
최대 길이	Up to 2000 mm panel dimension
강철 면면 두께	0.5-2.0 mm relief panel surface
코어 밀도	7850-8000 kg/m³ for steel components
열전도도 (Thermal Conductivity)	강철 등급에 따라 14 - 60 W / (m · K)
표면 마무리	Satin stainless or durable protective coating
접합 유형	Gasketed bolted frame with engineered relief or hinged retention assembly
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Stainless relief skinHinged or retained panelBurst indication switchCustom rectangular dimensions

Planning a Explosion Relief Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.