Complete explosion relief panel and retaining frame in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

爆発救済パネル

A lightweight engineered panel forming a defined pressure-relief boundary for process enclosures and ductwork.

Defined Pressure-Relief Boundary
Lightweight Panel Assembly
Gasketed Retaining Frame
Burst Indicator Option

商品紹介

The explosion relief panel closes a protected enclosure during normal operation and opens at an engineered differential pressure to release combustion gases toward a safe zone. Panel area, restraint and opening pressure depend on the enclosure strength, hazard and vent path. A perimeter gasket limits normal leakage, while optional indication confirms that the panel has opened.

主要な特徴

A calibrated weak boundary relieves pressure before the host enclosure fails.

Light panel construction supports rapid opening.

A gasketed frame maintains the normal process seal.

Burst indication can report relief operation to the control system.

お客様の製品に関する懸念事項

An enclosure exposed to rapid combustion needs a predictable relief path that does not compromise normal containment.

An arbitrary access panel opens at an unknown pressure.The relief assembly is engineered for a defined opening behavior and protected volume.

Normal air leakage disrupts process pressure control.A continuous perimeter gasket seals the panel during routine operation.

A released panel can become a projectile.Retention, hinge or tether arrangements control movement where the design requires them.

Operators may not know that a remote panel has opened.An optional burst switch reports relief operation and initiates shutdown logic.

典型的な用途

Process equipment enclosuresDust-handling cabinetsClean manufacturing toolsProtected ventilation ducts

技術的なパラメータ

Typical construction ranges are listed below; relief area and opening pressure require hazard-specific engineering.

コア材料	Stainless or coated steel relief skin with reinforced perimeter frame
パネルの厚さ	0.5-2.0 mm relief skin depending on design
有効幅	300-1200 mm
最大長さ	Up to 2000 mm panel dimension
鋼鉄の厚さを直面する	0.5-2.0 mm relief panel surface
コア密度	7850-8000 kg/m³ for steel components
熱伝導率	14 — 60 W / （ m · K ）鋼鉄等級による
表面仕上げ	Satin stainless or durable protective coating
ジョイントタイプ	Gasketed bolted frame with engineered relief or hinged retention assembly
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Stainless relief skinHinged or retained panelBurst indication switchCustom rectangular dimensions

Planning a Explosion Relief Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する