English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD علبة
The ESD Tray is a shallow reusable carrier with molded component pockets for organized handling of electrostatic-sensitive parts inside an ESD protected area.
- Conductive molded body keeps separated components at a common electrical potential.
- Defined pockets organize small assemblies without loose insulating separators.
- Reinforced flange enables repeatable stacking through production and storage routes.
مقدمة المنتج
This tray is thermoformed from charcoal-black conductive polymer into a rigid multi-pocket carrier. Rounded pocket corners reduce snagging and provide wiping access, while the continuous perimeter flange supports handling and stacking. Registration details help trays remain aligned without allowing the load above to bear directly on parts. Unlike an ordinary cafeteria tray or open tote, the defined cavity layout separates components and makes quantity checks straightforward.
الخصائص الرئيسية
Repeated molded cavities separate parts and reduce contact during movement.
Rounded cavity transitions support cleaning and easy part removal.
Reinforced perimeter flange resists handling distortion.
Stack registration preserves clearance above loaded pockets.
Compact shallow format suits benches, carts and flow racks.
Pocket count and geometry can follow the actual component envelope.
مخاوف المنتج للعملاء
Small sensitive parts must remain separated, countable and protected from charging while passing repeatedly between storage and production.
Loose parts collide or become mixed in an open container.Individual molded pockets maintain separation and visible quantities.
An insulating tray can charge during loading and transport.Conductive polymer provides an electrical path through the complete carrier.
Stacked trays press on the components below.The registered perimeter flange maintains designed vertical clearance.
Deep sharp cavities are difficult to clean and unload.Rounded pocket walls support wiping and fingertip access.
Generic cavity sizes allow parts to move excessively.Pocket length, width, depth and spacing can be matched to the component family.
تطبيقات نموذجية
IC, sensor and connector kitting.PCB subassembly transfer between controlled processes.Small medical-electronics component handling.Precision hardware counting and line-side presentation.Automated or manual work-cell replenishment.Returnable packaging within an ESD protected area.
المعلمات الفنية
The representative configuration is a reusable thermoformed kitting tray. Material, resistance range, footprint, cavity depth and stacking clearance are selected to suit the part and handling process.
| المواد الأساسية | Carbon-loaded conductive polypropylene or conductive high-impact polystyrene sheet |
|---|---|
| سمك اللوحة | 1.0–3.0 mm formed sheet thickness |
| العرض الفعال | 200–600 mm external tray width |
| الحد الأقصى الطول | Up to 800 mm external tray length |
| الصلب يواجه سمك | 0 mm; thermoformed polymer construction without steel facing |
| الكثافة الأساسية | 1000–1200 kg/m³ conductive polymer compound density |
| الموصلية الحرارية | 0.16–0.25 W/(m·K) for the formed polymer |
| إنهاء السطح | Matte charcoal-black, fine-textured cleanable molded surface |
| نوع المشترك | One-piece thermoformed pocket body with continuous reinforced stacking flange |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Custom cavity number, pitch and geometry.Conductive polypropylene or conductive styrene construction.Stackable, nestable or stack-and-nest profile.Drop-on conductive cover.Orientation key, part-number field or barcode area.Robotic pick clearance and fiducial features.Clean-packed or routine industrial supply.
Planning a ESD Tray specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
