Three-quarter view of conductive black ESD component tray with twelve molded pockets

ESD および帯電防止製品

ESD トレイ

The ESD Tray is a shallow reusable carrier with molded component pockets for organized handling of electrostatic-sensitive parts inside an ESD protected area.

Conductive molded body keeps separated components at a common electrical potential.
Defined pockets organize small assemblies without loose insulating separators.
Reinforced flange enables repeatable stacking through production and storage routes.

見積もりリクエスト製品案内

商品紹介

This tray is thermoformed from charcoal-black conductive polymer into a rigid multi-pocket carrier. Rounded pocket corners reduce snagging and provide wiping access, while the continuous perimeter flange supports handling and stacking. Registration details help trays remain aligned without allowing the load above to bear directly on parts. Unlike an ordinary cafeteria tray or open tote, the defined cavity layout separates components and makes quantity checks straightforward.

主要な特徴

Conductive polymer construction controls charge throughout the tray body.

Repeated molded cavities separate parts and reduce contact during movement.

Rounded cavity transitions support cleaning and easy part removal.

Reinforced perimeter flange resists handling distortion.

Stack registration preserves clearance above loaded pockets.

Compact shallow format suits benches, carts and flow racks.

Pocket count and geometry can follow the actual component envelope.

お客様の製品に関する懸念事項

Small sensitive parts must remain separated, countable and protected from charging while passing repeatedly between storage and production.

Loose parts collide or become mixed in an open container.Individual molded pockets maintain separation and visible quantities.

An insulating tray can charge during loading and transport.Conductive polymer provides an electrical path through the complete carrier.

Stacked trays press on the components below.The registered perimeter flange maintains designed vertical clearance.

Deep sharp cavities are difficult to clean and unload.Rounded pocket walls support wiping and fingertip access.

Generic cavity sizes allow parts to move excessively.Pocket length, width, depth and spacing can be matched to the component family.

典型的な用途

IC, sensor and connector kitting.PCB subassembly transfer between controlled processes.Small medical-electronics component handling.Precision hardware counting and line-side presentation.Automated or manual work-cell replenishment.Returnable packaging within an ESD protected area.

技術的なパラメータ

The representative configuration is a reusable thermoformed kitting tray. Material, resistance range, footprint, cavity depth and stacking clearance are selected to suit the part and handling process.

コア材料	Carbon-loaded conductive polypropylene or conductive high-impact polystyrene sheet
パネルの厚さ	1.0–3.0 mm formed sheet thickness
有効幅	200–600 mm external tray width
最大長さ	Up to 800 mm external tray length
鋼鉄の厚さを直面する	0 mm; thermoformed polymer construction without steel facing
コア密度	1000–1200 kg/m³ conductive polymer compound density
熱伝導率	0.16–0.25 W/(m·K) for the formed polymer
表面仕上げ	Matte charcoal-black, fine-textured cleanable molded surface
ジョイントタイプ	One-piece thermoformed pocket body with continuous reinforced stacking flange
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Custom cavity number, pitch and geometry.Conductive polypropylene or conductive styrene construction.Stackable, nestable or stack-and-nest profile.Drop-on conductive cover.Orientation key, part-number field or barcode area.Robotic pick clearance and fiducial features.Clean-packed or routine industrial supply.

Planning a ESD Tray specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する