İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
ESD ve Antistatik Ürünler
ESD Tepsisi
The ESD Tray is a shallow reusable carrier with molded component pockets for organized handling of electrostatic-sensitive parts inside an ESD protected area.
- Conductive molded body keeps separated components at a common electrical potential.
- Defined pockets organize small assemblies without loose insulating separators.
- Reinforced flange enables repeatable stacking through production and storage routes.
Ürün tanıtımı
This tray is thermoformed from charcoal-black conductive polymer into a rigid multi-pocket carrier. Rounded pocket corners reduce snagging and provide wiping access, while the continuous perimeter flange supports handling and stacking. Registration details help trays remain aligned without allowing the load above to bear directly on parts. Unlike an ordinary cafeteria tray or open tote, the defined cavity layout separates components and makes quantity checks straightforward.
Ana Özellikler
Repeated molded cavities separate parts and reduce contact during movement.
Rounded cavity transitions support cleaning and easy part removal.
Reinforced perimeter flange resists handling distortion.
Stack registration preserves clearance above loaded pockets.
Compact shallow format suits benches, carts and flow racks.
Pocket count and geometry can follow the actual component envelope.
Müşteri Ürün Sorunları
Small sensitive parts must remain separated, countable and protected from charging while passing repeatedly between storage and production.
Loose parts collide or become mixed in an open container.Individual molded pockets maintain separation and visible quantities.
An insulating tray can charge during loading and transport.Conductive polymer provides an electrical path through the complete carrier.
Stacked trays press on the components below.The registered perimeter flange maintains designed vertical clearance.
Deep sharp cavities are difficult to clean and unload.Rounded pocket walls support wiping and fingertip access.
Generic cavity sizes allow parts to move excessively.Pocket length, width, depth and spacing can be matched to the component family.
Tipik uygulamalar
IC, sensor and connector kitting.PCB subassembly transfer between controlled processes.Small medical-electronics component handling.Precision hardware counting and line-side presentation.Automated or manual work-cell replenishment.Returnable packaging within an ESD protected area.
Teknik parametreler
The representative configuration is a reusable thermoformed kitting tray. Material, resistance range, footprint, cavity depth and stacking clearance are selected to suit the part and handling process.
| Temel malzemeler | Carbon-loaded conductive polypropylene or conductive high-impact polystyrene sheet |
|---|---|
| Panel kalınlığı | 1.0–3.0 mm formed sheet thickness |
| Effective Width (Etkili Genişlik) | 200–600 mm external tray width |
| Maksimum uzunluk | Up to 800 mm external tray length |
| Çelik yüz yüze kalınlığı | 0 mm; thermoformed polymer construction without steel facing |
| Core Density (Çekirdek Yoğunluğu) | 1000–1200 kg/m³ conductive polymer compound density |
| Termal İletkenlik | 0.16–0.25 W/(m·K) for the formed polymer |
| Yüzey bitirme | Matte charcoal-black, fine-textured cleanable molded surface |
| Ortak tip | One-piece thermoformed pocket body with continuous reinforced stacking flange |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Custom cavity number, pitch and geometry.Conductive polypropylene or conductive styrene construction.Stackable, nestable or stack-and-nest profile.Drop-on conductive cover.Orientation key, part-number field or barcode area.Robotic pick clearance and fiducial features.Clean-packed or routine industrial supply.
Planning a ESD Tray specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
