English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
مدمجة HPL باب غرف الأبحاث
A reinforced 50 mm hygienic leaf clad with compact high-pressure laminate, offering a hard, colour-stable surface for laboratories, healthcare corridors and busy change areas.
- 5 mm Compact HPL Faces
- Hard Impact-Tolerant Surface
- Wide Colour Selection
- Sealed Molded Edge Detail
مقدمة المنتج
The Compact HPL Cleanroom Door uses dense laminate faces over a reinforced internal sheet and lightweight honeycomb. HPL supplies the visible colour and wear surface, while the concealed reinforcement supports locks, hinges and closers. Sealed edge profiles prevent the layered construction from being exposed at the perimeter. This format is useful where interior designers need stronger colour differentiation or a warm non-metal appearance without using porous timber faces.
الخصائص الرئيسية
Pigmented decorative faces provide wayfinding colours without a site-applied paint layer.
Concealed sheet reinforcement spreads hinge and lock loads through the leaf.
Closed edge profiles isolate the honeycomb and laminate cut edges from cleaning moisture.
Smooth faces can be machined precisely for flush glazing and integrated hardware.
مخاوف المنتج للعملاء
HPL door buyers want a durable coloured surface without exposed substrate edges, weak hardware fixings or difficult-to-clean trim.
Painted colour coding becomes scratched and uneven after repeated contact.Factory laminate provides a consistent hard colour surface across the complete leaf.
Raw laminate edges reveal layered material and absorb moisture.Molded or extruded perimeter caps close every machined edge.
Honeycomb alone does not hold heavy closer and lock screws reliably.Galvanized reinforcement inserts are bonded behind every hardware zone.
Projecting glazing beads interrupt the otherwise flat laminate face.Flush-set glass and slim sealed trims maintain an even cleaning plane.
تطبيقات نموذجية
Hospital clean corridorsLaboratory suitesGowning and changing roomsMedical-device facilitiesPharmaceutical support areas
المعلمات الفنية
Representative dimensions for a reinforced compact HPL cleanroom door leaf are listed below.
| المواد الأساسية | Flame-retardant paper honeycomb with galvanized reinforcement inserts |
|---|---|
| سمك اللوحة | 45-50 mm door leaf |
| العرض الفعال | 800-1200 mm single-leaf clear opening |
| الحد الأقصى الطول | 2400 mm maximum leaf height |
| الصلب يواجه سمك | 0 mm steel facing; 1.2 mm concealed galvanized reinforcement beneath 5 mm compact HPL faces |
| الكثافة الأساسية | 30-50 kg/m³ paper honeycomb |
| الموصلية الحرارية | 0.07-0.10 W/(m·K) typical paper honeycomb range |
| إنهاء السطح | Smooth compact high-pressure laminate in selected solid colour |
| نوع المشترك | Sealed molded leaf edge within an aluminum or stainless steel gasketed frame |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Contrasting two-side coloursFlush observation windowStainless kick protectionAntimicrobial laminate selection
Planning a Compact HPL Cleanroom Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
