Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Puerta de sala limpia compacta HPL
A reinforced 50 mm hygienic leaf clad with compact high-pressure laminate, offering a hard, colour-stable surface for laboratories, healthcare corridors and busy change areas.
- 5 mm Compact HPL Faces
- Hard Impact-Tolerant Surface
- Wide Colour Selection
- Sealed Molded Edge Detail
Introducción del producto
The Compact HPL Cleanroom Door uses dense laminate faces over a reinforced internal sheet and lightweight honeycomb. HPL supplies the visible colour and wear surface, while the concealed reinforcement supports locks, hinges and closers. Sealed edge profiles prevent the layered construction from being exposed at the perimeter. This format is useful where interior designers need stronger colour differentiation or a warm non-metal appearance without using porous timber faces.
Características clave
Pigmented decorative faces provide wayfinding colours without a site-applied paint layer.
Concealed sheet reinforcement spreads hinge and lock loads through the leaf.
Closed edge profiles isolate the honeycomb and laminate cut edges from cleaning moisture.
Smooth faces can be machined precisely for flush glazing and integrated hardware.
Preocupaciones del producto del cliente
HPL door buyers want a durable coloured surface without exposed substrate edges, weak hardware fixings or difficult-to-clean trim.
Painted colour coding becomes scratched and uneven after repeated contact.Factory laminate provides a consistent hard colour surface across the complete leaf.
Raw laminate edges reveal layered material and absorb moisture.Molded or extruded perimeter caps close every machined edge.
Honeycomb alone does not hold heavy closer and lock screws reliably.Galvanized reinforcement inserts are bonded behind every hardware zone.
Projecting glazing beads interrupt the otherwise flat laminate face.Flush-set glass and slim sealed trims maintain an even cleaning plane.
Aplicaciones típicas
Hospital clean corridorsLaboratory suitesGowning and changing roomsMedical-device facilitiesPharmaceutical support areas
Parámetros técnicos
Representative dimensions for a reinforced compact HPL cleanroom door leaf are listed below.
| Materiales Core | Flame-retardant paper honeycomb with galvanized reinforcement inserts |
|---|---|
| Panel de espesor | 45-50 mm door leaf |
| Ancho efectivo | 800-1200 mm single-leaf clear opening |
| Longitud máxima | 2400 mm maximum leaf height |
| Acero frente a espesor | 0 mm steel facing; 1.2 mm concealed galvanized reinforcement beneath 5 mm compact HPL faces |
| Densidad Core | 30-50 kg/m³ paper honeycomb |
| Conductividad térmica | 0.07-0.10 W/(m·K) typical paper honeycomb range |
| Superficie acabada | Smooth compact high-pressure laminate in selected solid colour |
| Tipo conjunto | Sealed molded leaf edge within an aluminum or stainless steel gasketed frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Contrasting two-side coloursFlush observation windowStainless kick protectionAntimicrobial laminate selection
Planning a Compact HPL Cleanroom Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
