English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرف نظيفة صندوق حمل
Reusable polypropylene cleanroom tote box with a fitted lid, smooth solid walls and reinforced stacking rim for controlled parts storage and transfer.
- Smooth polypropylene tote supports repeat cleaning and transfer
- Fitted lid protects staged parts from falling contamination
- Stackable footprint simplifies controlled material organization
مقدمة المنتج
The Cleanroom Tote Box uses a rigid polypropylene base and matching removable lid to form a closed transfer container. Smooth inner walls and rounded floor transitions simplify wipe-down cleaning, while the reinforced upper rim controls distortion when loaded. A positive stacking footprint keeps closed totes aligned in staging and storage areas.
الخصائص الرئيسية
Removable overlapping lid limits dust deposition during waiting periods
Molded hand grips remain integral to the side wall
Reinforced rim and base improve repeated stacking stability
Polypropylene construction resists many common aqueous cleaners
مخاوف المنتج للعملاء
Reusable totes can carry residue between process zones if corners, lids and handles are difficult to clean. Excess payload or damaged rims may also prevent secure stacking and lid closure.
Residue may collect beneath the lid flange or in sharp corners.Use radiused surfaces and include the lid in every cleaning cycle.
A warped rim can leave a visible lid gap.Inspect the rim and retire containers that no longer close evenly.
Excessive stacking load can deform the lower container.Apply the approved load and stack-height limits for the selected size.
Mixed tote ownership can undermine clean/dirty segregation.Assign dedicated colors or molded identification areas to each route.
تطبيقات نموذجية
For closed storage and internal transfer of clean components, packaged consumables, tools, subassemblies and documents in pharmaceutical, electronics, medical-device and precision manufacturing facilities.
المعلمات الفنية
These conservative ranges cover medium-size reusable polypropylene transfer totes. Final dimensions, lid style, resin grade and load rating should follow the stored components and cleaning method.
| المواد الأساسية | Impact-resistant polypropylene copolymer |
|---|---|
| سمك اللوحة | 2.5-5.0 mm nominal wall thickness |
| العرض الفعال | 300-600 mm external width |
| الحد الأقصى الطول | 800 mm external length |
| الصلب يواجه سمك | 0 mm; molded polymer construction |
| الكثافة الأساسية | 900-930 kg/m³ polypropylene copolymer |
| الموصلية الحرارية | 0.10-0.22 W/(m·K), resin dependent |
| إنهاء السطح | Smooth light-blue molded surface with radiused interior |
| نوع المشترك | One-piece molded base with removable overlapping fitted lid |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Light blue, natural white or static-control resinAttached, removable or drop-on lidStraight-wall stacking or nesting formatInternal dividers and label holderSolid or drainage baseCustom dimensions and clean double packaging
Planning a Cleanroom Tote Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
