English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
تنظيف الغرف النظيفة والتطهير والتعقيم
غرفة نظيفة معقم الأحذية
A compact walk-on footwear hygiene station that cleans shoe soles with rotating brushes and applies a controlled disinfectant solution before personnel enter clean areas.
- Sensor-activated brushes remove soil from footwear soles
- Metered disinfectant wetting supports repeatable hygiene steps
- Stainless walk-on platform fits controlled entry routes
مقدمة المنتج
This cleanroom shoe sterilizer combines mechanical sole cleaning with compatible disinfectant application in one compact station. The stainless housing, removable brushes, drainable tray, adjustable dosing, and sensor control support routine cleaning. It is intended for installed entry procedures and does not replace facility floor cleaning or footwear controls.
الخصائص الرئيسية
Stainless-steel walk-on housing and grid
Automatic presence or hand-contact activation
Adjustable disinfectant dosing pump
Removable brush rollers and debris tray
Anti-slip entry and exit surfaces
Stable stainless handrails
Dry-brush or wet-disinfection configuration
مخاوف المنتج للعملاء
Footwear can track particles and microorganisms across gowning boundaries. Passive mats may be bypassed or lose effectiveness as they load, so a forced, maintainable entry step is often preferred.
How is use encouraged at the entry point?The guided platform and handrail place the cleaning step directly in the personnel route, with automatic activation during passage.
Can brushes be cleaned easily?Tool-free removable rollers and a lift-out tray allow routine wash-down and debris removal.
How is chemical use controlled?An adjustable pump meters compatible solution to the brushes, while wet or dry operation can be selected for the site procedure.
Is the walking surface safe?Anti-slip grating, stable rails, controlled brush speed, and a level installation support secure passage.
تطبيقات نموذجية
Pharmaceutical cleanroom entrancesFood-processing hygiene barriersLaboratories and animal facilitiesMedical-device manufacturingDust-controlled workshopsGowning-room access routes
المعلمات الفنية
Two horizontal brush rollers rotate beneath an open stainless walking grid. An approach or hand-contact sensor starts the motor and dosing circuit, while a removable collection tray captures liquid and debris. Handrails provide stability during use.
| المواد الأساسية | 304 stainless-steel housing with replaceable nylon brush rollers |
|---|---|
| سمك اللوحة | 20–40 mm reinforced platform sections |
| العرض الفعال | 700–1100 mm walking width |
| الحد الأقصى الطول | 850–1600 mm overall station length |
| الصلب يواجه سمك | 1.0–1.5 mm stainless-steel facing |
| الكثافة الأساسية | 35–50 kg/m³ sealed platform insulation where fitted |
| الموصلية الحرارية | 0.030–0.040 W/(m·K) for optional insulated sections |
| إنهاء السطح | Brushed stainless steel with anti-slip walking grid |
| نوع المشترك | Welded hygienic housing seams with removable brush shafts and drainable tray connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Dry brush or wet disinfectant operationSingle-step or walk-through lengthHandrail and turnstile integrationHand-disinfection moduleAutomatic chemical dosingDrain connection or removable tankBrush colors and bristle grades
Planning a Cleanroom Shoe Sterilizer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
