クリーンルーム機器と無菌施設の必需品のワンストップサプライヤー国際プロジェクト支援
Open mobile navigationClose mobile navigation
クリーンルームの清掃 · 消毒 · 滅菌

クリーンルームの靴滅菌器

A compact walk-on footwear hygiene station that cleans shoe soles with rotating brushes and applies a controlled disinfectant solution before personnel enter clean areas.
  • Sensor-activated brushes remove soil from footwear soles
  • Metered disinfectant wetting supports repeatable hygiene steps
  • Stainless walk-on platform fits controlled entry routes
見積もりリクエスト 製品案内

商品紹介

This cleanroom shoe sterilizer combines mechanical sole cleaning with compatible disinfectant application in one compact station. The stainless housing, removable brushes, drainable tray, adjustable dosing, and sensor control support routine cleaning. It is intended for installed entry procedures and does not replace facility floor cleaning or footwear controls.

主要な特徴

Twin rotating nylon sole brushes

Stainless-steel walk-on housing and grid

Automatic presence or hand-contact activation

Adjustable disinfectant dosing pump

Removable brush rollers and debris tray

Anti-slip entry and exit surfaces

Stable stainless handrails

Dry-brush or wet-disinfection configuration

お客様の製品に関する懸念事項

Footwear can track particles and microorganisms across gowning boundaries. Passive mats may be bypassed or lose effectiveness as they load, so a forced, maintainable entry step is often preferred.

How is use encouraged at the entry point?The guided platform and handrail place the cleaning step directly in the personnel route, with automatic activation during passage.
Can brushes be cleaned easily?Tool-free removable rollers and a lift-out tray allow routine wash-down and debris removal.
How is chemical use controlled?An adjustable pump meters compatible solution to the brushes, while wet or dry operation can be selected for the site procedure.
Is the walking surface safe?Anti-slip grating, stable rails, controlled brush speed, and a level installation support secure passage.

典型的な用途

Pharmaceutical cleanroom entrancesFood-processing hygiene barriersLaboratories and animal facilities医療機器製造Dust-controlled workshopsGowning-room access routes

技術的なパラメータ

Two horizontal brush rollers rotate beneath an open stainless walking grid. An approach or hand-contact sensor starts the motor and dosing circuit, while a removable collection tray captures liquid and debris. Handrails provide stability during use.

コア材料304 stainless-steel housing with replaceable nylon brush rollers
パネルの厚さ20–40 mm reinforced platform sections
有効幅700–1100 mm walking width
最大長さ850–1600 mm overall station length
鋼鉄の厚さを直面する1.0–1.5 mm stainless-steel facing
コア密度35–50 kg/m³ sealed platform insulation where fitted
熱伝導率0.030–0.040 W/(m·K) for optional insulated sections
表面仕上げBrushed stainless steel with anti-slip walking grid
ジョイントタイプWelded hygienic housing seams with removable brush shafts and drainable tray connections
カスタマイズ意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Dry brush or wet disinfectant operationSingle-step or walk-through lengthHandrail and turnstile integrationHand-disinfection moduleAutomatic chemical dosingDrain connection or removable tankBrush colors and bristle grades

Planning a Cleanroom Shoe Sterilizer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する
メール送信 WhatsApp WeChat

ホーム

製品

ニュース

会社概要

お問い合わせ