English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
غرف نظيفة الحماية السكك الحديدية
A low-profile hygienic wall guard with a replaceable light-gray PVC-u cover, continuous aluminum retainer and color-matched end caps for cleanroom traffic zones.
- 100 mm Impact Face
- Continuous Aluminum Retainer
- Six-Point Mounting Pattern
- Replaceable PVC-u Cover
مقدمة المنتج
The cleanroom protection rail uses a gently curved rigid PVC-u cover clipped over a continuous 6063-T5 aluminum retainer. Its 100 mm face presents a broad contact surface at trolley and cart height without resembling a handrail or projecting tube. Six countersunk holes distribute the retainer fixings along a standard section, while one close-fitting molded cap finishes each cut end and closes the exposed profile edges.
الخصائص الرئيسية
A 2.0 mm impact-modified PVC-u skin snaps onto the concealed metal support and can be replaced without removing the full retainer.
The continuous 2.0 mm aluminum backing keeps the long rail profile aligned and supports load transfer between fixing points.
Six countersunk mounting positions provide a predictable fastening layout along a 3660 mm section.
Color-matched molded caps close both rail ends with smooth transitions that remain accessible for wipe-down.
مخاوف المنتج للعملاء
Traffic at equipment and trolley height can mark modular wall finishes, loosen local repairs and create ledges that are difficult to clean.
Repeated cart contact can dent a cleanroom panel skin at the same operating height.The wide curved PVC-u face and continuous aluminum backing spread contact along the rail before it reaches the finished wall.
Open profile ends and projecting hardware create dirt traps along a frequently cleaned corridor.Close-fitting molded caps and a snap-on cover conceal cut edges and fasteners behind smooth accessible surfaces.
Replacing a permanently bonded guard after visible abrasion can disrupt an operating controlled area.The replaceable cover separates routine cosmetic renewal from the retained wall-mounted aluminum support.
A long guard fixed at irregular points can bow or follow an uneven line across modular panels.The rigid continuous retainer and defined six-hole layout support level positioning and consistent fastening along the section.
تطبيقات نموذجية
Cleanroom corridors exposed to material-cart trafficPharmaceutical production and laboratory circulation routesControlled equipment staging and service zonesHygienic food and medical-device processing corridorsWall protection beside pass-through and transfer areas
المعلمات الفنية
Typical construction and dimensional values for a light-gray PVC-u cleanroom wall protection rail are listed below.
| المواد الأساسية | Impact-modified rigid PVC-u snap-on cover over a continuous 6063-T5 aluminum retainer with molded PVC-u end caps |
|---|---|
| سمك اللوحة | Approximately 29 mm overall rail projection from the finished wall |
| العرض الفعال | 100 mm nominal protective face height |
| الحد الأقصى الطول | Up to 3660 mm per continuous rail section |
| الصلب يواجه سمك | No steel facing; 2.0 mm nominal PVC-u cover and 2.0 mm aluminum retainer |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the 6063 aluminum retainer |
| الموصلية الحرارية | Approximately 190 W/(m·K) for 6063 aluminum at 20°C |
| إنهاء السطح | Through-colored fine-textured light-neutral-gray PVC-u with a mill-finish satin-silver aluminum retainer |
| نوع المشترك | Snap-fit PVC-u cover on a continuous predrilled retainer with two fitted end caps and six countersunk wall fixings per 3660 mm section |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Alternative through-colored neutral PVC-u cover colorsFactory-cut rail lengths for the required wall runMatching left and right end caps, outside corners and inside cornersSubstrate-compatible anchors for modular panels, masonry or reinforced backingOptional spacer pads where additional wall clearance is required
Planning a Cleanroom Protection Rail specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
