รางป้องกันห้องสะอาด
- 100 mm Impact Face
- Continuous Aluminum Retainer
- Six-Point Mounting Pattern
- Replaceable PVC-u Cover
การแนะนําสินค้า
The cleanroom protection rail uses a gently curved rigid PVC-u cover clipped over a continuous 6063-T5 aluminum retainer. Its 100 mm face presents a broad contact surface at trolley and cart height without resembling a handrail or projecting tube. Six countersunk holes distribute the retainer fixings along a standard section, while one close-fitting molded cap finishes each cut end and closes the exposed profile edges.
คุณสมบัติที่สําคัญ
A 2.0 mm impact-modified PVC-u skin snaps onto the concealed metal support and can be replaced without removing the full retainer.
The continuous 2.0 mm aluminum backing keeps the long rail profile aligned and supports load transfer between fixing points.
Six countersunk mounting positions provide a predictable fastening layout along a 3660 mm section.
Color-matched molded caps close both rail ends with smooth transitions that remain accessible for wipe-down.
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
Traffic at equipment and trolley height can mark modular wall finishes, loosen local repairs and create ledges that are difficult to clean.
การใช้งานทั่วไป
พารามิเตอร์ทางเทคนิค
Typical construction and dimensional values for a light-gray PVC-u cleanroom wall protection rail are listed below.
| วัสดุหลัก | Impact-modified rigid PVC-u snap-on cover over a continuous 6063-T5 aluminum retainer with molded PVC-u end caps |
|---|---|
| ความหนาของแผง | Approximately 29 mm overall rail projection from the finished wall |
| ความกว้างที่มีประสิทธิภาพ | 100 mm nominal protective face height |
| ความยาวสูงสุด | Up to 3660 mm per continuous rail section |
| ความหนาของเหล็กหันหน้า | No steel facing; 2.0 mm nominal PVC-u cover and 2.0 mm aluminum retainer |
| ความหนาแน่นหลัก | Approximately 2700 kg/m³ for the 6063 aluminum retainer |
| การนําความร้อน | Approximately 190 W/(m·K) for 6063 aluminum at 20°C |
| เสร็จสิ้นพื้นผิว | Through-colored fine-textured light-neutral-gray PVC-u with a mill-finish satin-silver aluminum retainer |
| ประเภทร่วม | Snap-fit PVC-u cover on a continuous predrilled retainer with two fitted end caps and six countersunk wall fixings per 3660 mm section |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Planning a Cleanroom Protection Rail specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม