English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرفة نظيفة هود
A white low-lint cleanroom hood with an eyes-only opening, shoulder bib and adjustable closure for controlled-environment gowning.
- Eyes-only opening limits exposed head area
- Shoulder-length bib supports garment overlap
- Bound seams and adjustable rear snaps
مقدمة المنتج
The Cleanroom Hood encloses the hair, ears, neck and upper shoulders while leaving a controlled opening around the eyes. Its flash-spun polyethylene shell uses bound seams and bound edges to contain raw seam surfaces, and the extended bib overlaps a compatible coverall or frock. Rear snaps allow practical fit adjustment without placing a loose tie near the work area.
الخصائص الرئيسية
Extended front and rear bib panels tuck beneath the outer garment
Bound seam construction reinforces joins and covers cut edges
Rear snap adjustment helps control excess fabric around the head
Smooth white surface supports visual cleanliness checks
مخاوف المنتج للعملاء
A hood must balance facial coverage, field of view and overlap with the remaining gowning system. Poor aperture sizing or a short bib can expose skin during head movement.
The face opening may shift and expose the forehead or cheek area.Specify a bound eyes-only opening with geometry matched to the intended eye protection.
A shallow bib may pull out from the coverall neckline.Use a shoulder-length bib with sufficient front and rear garment overlap.
Uncovered seam edges can become a particle-release point.Select bound seams and enclosed edge finishing throughout the hood.
Excess crown volume can interfere with goggles or head movement.Add low-profile rear snap adjustment and choose the appropriate hood size.
تطبيقات نموذجية
Used in pharmaceutical and biotechnology production, medical-device assembly, aseptic support operations, controlled laboratories and clean packing areas as part of a compatible head-to-body gowning system.
المعلمات الفنية
These dimensions describe a separate cleanroom hood with a full shoulder bib. Final aperture, size and packaging configuration should match the complete gowning ensemble.
| المواد الأساسية | Flash-spun high-density polyethylene nonwoven |
|---|---|
| سمك اللوحة | 0.12–0.22 mm |
| العرض الفعال | 560–605 mm when laid flat |
| الحد الأقصى الطول | 470 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 55–85 kg/m³ apparent material bulk density |
| الموصلية الحرارية | 0.035–0.055 W/(m·K), material dependent |
| إنهاء السطح | Smooth low-lint white surface with bound face and bottom edges |
| نوع المشترك | Bound crown and bib seams with rear snap fit adjustment |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Medium and large fit rangesEyes-only or larger open-face apertureRear snaps or tie adjustmentSterile or non-sterile supply configurationClean-processed individual packagingDisposable polyethylene or reusable conductive polyester construction
Planning a Cleanroom Hood specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
