Cleanroom hood three-quarter front view with eyes-only opening and shoulder bib

Garmen Cleanroom, PPE dan Consumables

Cleanroom Hood (Hod Ruang Bersih)

A white low-lint cleanroom hood with an eyes-only opening, shoulder bib and adjustable closure for controlled-environment gowning.

Eyes-only opening limits exposed head area
Shoulder-length bib supports garment overlap
Bound seams and adjustable rear snaps

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Cleanroom Hood encloses the hair, ears, neck and upper shoulders while leaving a controlled opening around the eyes. Its flash-spun polyethylene shell uses bound seams and bound edges to contain raw seam surfaces, and the extended bib overlaps a compatible coverall or frock. Rear snaps allow practical fit adjustment without placing a loose tie near the work area.

Fitur utama:

Eyes-only facial aperture reduces uncovered skin compared with an open-face hood

Extended front and rear bib panels tuck beneath the outer garment

Bound seam construction reinforces joins and covers cut edges

Rear snap adjustment helps control excess fabric around the head

Smooth white surface supports visual cleanliness checks

Kekhawatiran produk pelanggan

A hood must balance facial coverage, field of view and overlap with the remaining gowning system. Poor aperture sizing or a short bib can expose skin during head movement.

The face opening may shift and expose the forehead or cheek area.Specify a bound eyes-only opening with geometry matched to the intended eye protection.

A shallow bib may pull out from the coverall neckline.Use a shoulder-length bib with sufficient front and rear garment overlap.

Uncovered seam edges can become a particle-release point.Select bound seams and enclosed edge finishing throughout the hood.

Excess crown volume can interfere with goggles or head movement.Add low-profile rear snap adjustment and choose the appropriate hood size.

Aplikasi yang Tipis

Used in pharmaceutical and biotechnology production, medical-device assembly, aseptic support operations, controlled laboratories and clean packing areas as part of a compatible head-to-body gowning system.

Parameter teknis

These dimensions describe a separate cleanroom hood with a full shoulder bib. Final aperture, size and packaging configuration should match the complete gowning ensemble.

Bahan inti	Flash-spun high-density polyethylene nonwoven
Ketebalan Panel (Panel Thickness)	0.12–0.22 mm
Efektif lebar	560–605 mm when laid flat
Panjang maksimum	470 mm
Baja menghadap ketebalan	0 mm; tidak ada baja menghadap yang digunakan
Kepadatan inti (core density)	55–85 kg/m³ apparent material bulk density
Konduktivitas Termal (Thermal Conductivity)	0.035–0.055 W/(m·K), material dependent
Permukaan selesai	Smooth low-lint white surface with bound face and bottom edges
Jenis Bersama	Bound crown and bib seams with rear snap fit adjustment
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Medium and large fit rangesEyes-only or larger open-face apertureRear snaps or tie adjustmentSterile or non-sterile supply configurationClean-processed individual packagingDisposable polyethylene or reusable conductive polyester construction

Planning a Cleanroom Hood specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami