Cleanroom hood three-quarter front view with eyes-only opening and shoulder bib

클린룸 의류, PPE 및 소모품

클린 룸 후드

A white low-lint cleanroom hood with an eyes-only opening, shoulder bib and adjustable closure for controlled-environment gowning.

Eyes-only opening limits exposed head area
Shoulder-length bib supports garment overlap
Bound seams and adjustable rear snaps

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Hood encloses the hair, ears, neck and upper shoulders while leaving a controlled opening around the eyes. Its flash-spun polyethylene shell uses bound seams and bound edges to contain raw seam surfaces, and the extended bib overlaps a compatible coverall or frock. Rear snaps allow practical fit adjustment without placing a loose tie near the work area.

주요 기능

Eyes-only facial aperture reduces uncovered skin compared with an open-face hood

Extended front and rear bib panels tuck beneath the outer garment

Bound seam construction reinforces joins and covers cut edges

Rear snap adjustment helps control excess fabric around the head

Smooth white surface supports visual cleanliness checks

고객 제품 관심사

A hood must balance facial coverage, field of view and overlap with the remaining gowning system. Poor aperture sizing or a short bib can expose skin during head movement.

The face opening may shift and expose the forehead or cheek area.Specify a bound eyes-only opening with geometry matched to the intended eye protection.

A shallow bib may pull out from the coverall neckline.Use a shoulder-length bib with sufficient front and rear garment overlap.

Uncovered seam edges can become a particle-release point.Select bound seams and enclosed edge finishing throughout the hood.

Excess crown volume can interfere with goggles or head movement.Add low-profile rear snap adjustment and choose the appropriate hood size.

일반적인 응용 프로그램

Used in pharmaceutical and biotechnology production, medical-device assembly, aseptic support operations, controlled laboratories and clean packing areas as part of a compatible head-to-body gowning system.

기술 매개변수

These dimensions describe a separate cleanroom hood with a full shoulder bib. Final aperture, size and packaging configuration should match the complete gowning ensemble.

핵심 재료	Flash-spun high-density polyethylene nonwoven
패널 두께	0.12–0.22 mm
유효 폭	560–605 mm when laid flat
최대 길이	470 mm
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	55–85 kg/m³ apparent material bulk density
열전도도 (Thermal Conductivity)	0.035–0.055 W/(m·K), material dependent
표면 마무리	Smooth low-lint white surface with bound face and bottom edges
접합 유형	Bound crown and bib seams with rear snap fit adjustment
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Medium and large fit rangesEyes-only or larger open-face apertureRear snaps or tie adjustmentSterile or non-sterile supply configurationClean-processed individual packagingDisposable polyethylene or reusable conductive polyester construction

Planning a Cleanroom Hood specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.