English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
غرفة نظيفة باب التشابك المراقب
A central low-voltage controller for cleanroom airlocks, coordinating door-position inputs, electric locks, request devices, status indicators, alarms and emergency release functions.
- Configurable Door Logic
- Labeled Lock and Sensor I/O
- Alarm and Emergency Inputs
- Access-Control Integration
مقدمة المنتج
The cleanroom door interlock controller is the logic hub behind a personnel or material airlock. It reads each door-position contact, determines whether another opening request is permitted and controls the corresponding electromagnetic lock or electric strike. A serviceable enclosure contains the power supply, protected output circuits, labeled terminals and programmable logic. Interface contacts can exchange status or release commands with access control, fire alarm and building-management systems without placing exposed electronics in the cleanroom doorway.
الخصائص الرئيسية
Protected lock outputs support common fail-safe or fail-secure electric-lock arrangements.
Adjustable door-open and air-purge delays accommodate different airlock operating sequences.
Dry-contact interfaces allow coordinated signals with access control, fire alarm and BMS equipment.
مخاوف المنتج للعملاء
A controller must make door state visible, release locks safely and avoid ambiguous field wiring while remaining flexible enough for different airlock sequences.
A controller releases a second door because it cannot confirm that the first door is fully closed.Independent door-position inputs are evaluated before every release output is enabled.
Unlabeled field terminals make service faults difficult to isolate.Grouped and clearly identified inputs, lock outputs and auxiliary contacts simplify tracing and replacement.
A rigid sequence cannot accommodate purge time or emergency egress requirements.Configurable timers and dedicated emergency/fire inputs separate normal operating logic from safety release behavior.
تطبيقات نموذجية
Personnel airlocksMaterial airlocksCleanroom gowning suitesLaboratory containment entrances
المعلمات الفنية
Typical controller enclosure and low-voltage interface ranges are listed below.
| المواد الأساسية | Industrial control PCB, protected relay outputs and regulated low-voltage power supply in a service enclosure |
|---|---|
| سمك اللوحة | 80–130 mm enclosure depth |
| العرض الفعال | 200–300 mm enclosure width |
| الحد الأقصى الطول | 350 mm enclosure height |
| الصلب يواجه سمك | 1.0–1.5 mm powder-coated steel enclosure; polycarbonate enclosure optional |
| الكثافة الأساسية | Approximately 1800–1920 kg/m³ for the glass-reinforced PCB laminate |
| الموصلية الحرارية | Approximately 0.4–0.7 W/(m·K) for the PCB laminate used inside the controller |
| إنهاء السطح | Powder-coated steel or smooth sealed polycarbonate enclosure with labeled internal terminals |
| نوع المشترك | DIN-rail and PCB terminal connections for door contacts, locks, request buttons and auxiliary dry contacts |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
12 or 24 VDC lock circuitsFail-safe or fail-secure logicDoor-open alarm and purge timerFire alarm, BMS and access-control interfaces
Planning a Cleanroom Door Interlock Controller specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
